home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 20
/
Cream of the Crop 20 (Terry Blount) (1996).iso
/
os2
/
nef234.zip
/
NEF.INF
(
.txt
)
< prev
next >
Wrap
OS/2 Help File
|
1996-05-20
|
155KB
|
5,766 lines
ΓòÉΓòÉΓòÉ 1. Readme First ΓòÉΓòÉΓòÉ
NEF Readme First
ΓòÉΓòÉΓòÉ 1.1. Files in the archive ΓòÉΓòÉΓòÉ
Files in the original archive:
File_Id.Diz The standard archive description
Nef.Exe The executable
Nef.Ico An Icon for NEF
Nef1.Ico Another Icon for NEF
Nef.Inf The Inf hypertextual Manual
Readme.1st This file
Whatsnew.Txt Changes and additions
Nef_Ful.Cfg The full example configuration file
Nef_Pnt.Cfg The minimal example cfg for points
Ticarea.Cfg The example area configuration
Compress.Cfg The example archiver-definition
Prefix.Nef The example announcement prefix
Suffix.Nef The example announcement suffix
NefHelp.Txt The example Link Robot help file
Nef.Doc The user's manual
License.Doc The license for using this software
Register.Doc Info on Registration
Register.For The registration form
BmtMicro.For The BMT Micro registration form
PsL.Crd The PsL Credit Card registration form supplement
OS/2 Only
PmHatch.Exe The PM hatch executable
PmHatch.Ico An Icon to be associated to "Nef Send"
feature\
Feature.Dll An example Feature Dll
Feature.C Its source
NeFeat.H The necessary Include file
Dos Only
Dos4Gw.Exe Dos Extender (major releases only)
If you have a maintenance release of the program,
the dos extender will not be included, to avoid
unnecessary distribution costs.
Note: The Icons are kindly made available by Andrea Vavassori of
2:331/219.
The OS/2 Inf manual is provided with other versions too,
since there are INF viewers under Dos. For example, the very
nice viewer by Damir Ujcic: VIEW01.ZIP, available for F/R from
2:332/504@fidonet: it contains a text mode viewer in both OS/2
and Dos versions.
ΓòÉΓòÉΓòÉ 1.2. Whatsnew ΓòÉΓòÉΓòÉ
Whatsnew
If you are using an older version of the program, please read
WhatsNew.Txt before using this version.
ΓòÉΓòÉΓòÉ 1.3. How to contact the author ΓòÉΓòÉΓòÉ
How to contact the author
If you have suggestions, bug reports, observations about the
docs, please feel free to contact me at the following
addresses:
Alberto Pasquale of 2:332/504@fidonet
alberto.pasquale@mo.nettuno.it
2:332/504@fidonet +39-59-246112 ISDNC V34+ VFC V32T H16
2:332/524@fidonet +39-59-246113 ISDNC V34 VFC V32T H16 FAX
Alberto Pasquale, Viale Verdi 106, 41100 Modena, Italy
IMPORTANT: if you call crash and require an answer, please state
whether you want it routed (might not be reliable) or ON HOLD
(in which case an answer should be available in 48h maximum,
apart from the holiday periods).
ΓòÉΓòÉΓòÉ 1.4. Support ECHO ΓòÉΓòÉΓòÉ
Support ECHO
I am originating an international support echo for all my
programs. If you are interested, please ask your echo feeder to
find a suitable link for the APWORKS area. In addition, I
regularly read the international OS2BBS echo.
ΓòÉΓòÉΓòÉ 1.5. TIC distribution ΓòÉΓòÉΓòÉ
TIC distribution
All my BBS related programs are distributed via a TIC file area.
If you want to join, please ask your file feeder to find a
suitable link for the APBBS (OS/2) and/or APBBSDOS (Dos/NT)
area.
Beta versions are distributed without restrictions in
APBBSBETA and APBBSDOSBETA respectively.
ΓòÉΓòÉΓòÉ 1.6. APWorks Programs and Support Areas ΓòÉΓòÉΓòÉ
Where to look for
APWorks Programs and Support Areas
In North America the APWORKS support echo should be easily
available, since it is on the Zone 1 backbone.
The following systems carry the ApWorks echo and file areas:
Author's
APWORKS
Alberto Pasquale, Modena, Italy
alberto.pasquale@mo.nettuno.it
2:332/504@fidonet +39-59-246112 ISDNC V34+ VFC V32T H16
2:332/524@fidonet +39-59-246113 ISDNC V34 VFC V32T H16
File requests could be declined between 23:00 and 06:00 GMT.
Request APFILES for a (short) list of APWORKS files only.
Europe
ApWorks_Germany
Roland Schiradin, Eltville, Germany
degr9tr9@ibmmail.com
2:2454/169@fidonet
Cyberia/2
Harald Kamm, Bamberg, Germany
2:2490/3045@fidonet
McBears Cave
Jens Holm, Skanderborg, Denmark
2:238/888@fidonet
MufNet HQ
Paul Bergquist, Hollviken, Sweden
2:200/146@fidonet
paul.bergquist@moderat.se
paulb@sbbs.se
The BackRoom/2 BBS
Martin Davies, Cardiff, Wales, United Kingdom
gbear@backroom.baynet.co.uk
2:442/617@fidonet
Air Applewood
Vince Coen, Roydon, Harlow, Essex, United Kingdom
2:257/609@fidonet
PULSAR BBS
Branko Radojevic, Dubrovnik, Croatia
branko@pfdu.hr
sysop@pulsar.fido.hr
2:381/124@fidonet
North America
COMM Port OS/2
Bob Juge, Sugar Land, TX, USA
bob@juge.com
1:106/2000@fidonet
The CrossRoads
Dave Reed, Puyallup, WA, USA
dreed@aa.net
1:138/135@fidonet
Eclectic Lab 1
Mary-Anne Wise, New Westminster, BC, Canada
1:153/831@fidonet
Australia
Tardis BBS
Malcolm Miles, North Balwyn, VIC, Australia
3:633/260@fidonet
ΓòÉΓòÉΓòÉ 1.6.1. File Areas on the Internet ΓòÉΓòÉΓòÉ
File Areas on the Internet
UK
ftp.enterprise.net
/apworks
ftp.baynet.co.uk
/pub/apworks/os2
/pub/apworks/dos
/pub/apworks/beta
USA
ftp.juge.com
ftp.coast.net
/SimTel/vendors/maximus
ftp.wilmington.net
/bmtmicro
Only the final release versions of programs that can be
registered via Bmt Micro.
ΓòÉΓòÉΓòÉ 1.7. Latest Versions ΓòÉΓòÉΓòÉ
How to Request the
Latest Version of APWORKS Programs
The following magics are honoured by APWORKS and some of the
support sites:
Magic Name Description
APFILES ApFiles.Lst List of Programs by Alberto Pasquale
FASTLST FLST???.RAR OS/2 The ultimate v7 Nodelist processor.
Fully automated processing and
maintenance, no need for clumsy batch
files. Can report to Squish or *.MSG
areas, multitasking friendly, many
options.
FASTLSTD FLSTD???.RAR DOS
FASTLSTW FLSTW???.RAR NT
FASTLSTG German Docs by Roland Schiradin
Available on 2:2454/169
NEF NEF???.RAR OS/2 TIC file distribution and
announcement for Binkley-style
outbound and *.MSG or Squish message
base, file-Areafix included with
FileBone support, full multitasking
aware (BSY, file sharing etc.),
exceptionally flexible Multi-Aka
support.
NEFD NEFD???.RAR DOS 32 bit only, w DOS4GW extender.
NEFW NEFW???.RAR NT
NEFG German Docs by Roland Schiradin
Available on 2:2454/169
FLM FLM???.RAR OS/2 File List Manager for Maximus,
very flexible way of compiling
many different lists at a time.
Internal file base support
(no need for FBP).
FLMD FLMD???.RAR DOS 32 bit only, w DOS4GW extender.
NMFW NMFW???.RAR OS/2 Multi-Robot: netmail forward to
Sysop's point, Maximus user and file
management via netmail messages,
areafix for squish, point routing to
their boss if no phone number for
them in the nodelist, etc.
NMFWD NMFWD???.RAR DOS 32 bit only, w DOS4GW extender.
QFB QFB???.RAR OS/2 Substitute for FBP.EXE
Generates a separate file-request
index with no duplicates.
QFBD QFBD???.RAR DOS 32 bit only, w DOS4GW extender
QFBG German Docs by Roland Schiradin
Available on 2:2454/169
SQPRV SQPV???.RAR OS/2 Local area (private/public) forward
to points for Squish. The (Co)SysOp
points can receive the whole area.
SQPRVD SQPVD???.RAR DOS
----- SQFM100.RAR OS/2 Allows to change the "from address"
of PKTs before they are compressed.
To be used with Squish.
For example, it is useful to Hub
coordinators who want to continue
processing mail with their primary
address for current links while
processing with the administrative
address for their uplink BackBone.
FreeWare.
----- SqSetAll.Rar OS/2 Sets renum limits in all Squish Areas
taking the parameters from
Squish.Cfg.
----- SqSetDos.Rar DOS Dos version.
----- AdjFDate.Rar OS/2 Changes by +-N days the File Date.
Can choose between Creation and
Modification dates on HPFS.
Show and Touch options.
----- AdjF_Dos.Rar DOS Changes by +-N days the File Date.
Current versions (May 20th 1996): NEF 2.34, FastLst 1.32
(1.33 for OS/2), FLM 1.34, NMFWD 2.03, QFB 1.08, SQPrv 1.04.
ΓòÉΓòÉΓòÉ 1.8. Bug Reports ΓòÉΓòÉΓòÉ
Bug Reports
If you find out a real bug, I will do my best to fix it and make
the new version available in a few days. To do that, I need your
cooperation: when you find a strange behaviour, double check
your configuration and the manual to be really sure it's not
your fault, then study the conditions in which the bug appears
and, in the end, send me your detailed report about the bug
together with your config file and all the stuff necessary to
replicate the problem. I can fix a bug only if I am enabled to
reproduce it !
ΓòÉΓòÉΓòÉ 1.9. Wish List ΓòÉΓòÉΓòÉ
Wish List
To help me provide a better and better program, please let
me know your problems and your wishes about future versions.
Please let me know your opinion:
Alberto Pasquale 2:332/504@fidonet
alberto.pasquale@mo.nettuno.it
BBS: +39-59-246112 ISDNC V34+ VFC V32T H16
BBS/FAX: +39-59-246113 ISDNC V34 VFC V32T H16 FAX
Viale Verdi 106
41100 Modena
Italy
ΓòÉΓòÉΓòÉ 2. Whatsnew ΓòÉΓòÉΓòÉ
NEF
Changes and Additions
ΓòÉΓòÉΓòÉ 2.1. 2.34 ΓòÉΓòÉΓòÉ
2.34 Public Release, May 20 1996
- Extension of the PassThru concept.
If you specify the "-0" flag in a FileArea definition,
when you do "Nef Clean", the files not currently
referenced in outbound attaches are deleted.
If you specify "-0<days>", the files in that area will
not be deleted until they become older than <days> _AND_
there is no file attach pointing to them.
Example:
FileArea Area1 \file\area1\ O -030 2:345/678 I123/4
Files in \file\area1 will be deleted when older than 30
days _and_ not referenced by any file attach.
- OS/2: New "KillDate Write|Creation" statement.
To specify the date to be used for evaluating the file
age that triggers the file deletion in passthru areas.
This statement is useful for HPFS, ignored on FAT.
If none specified, "Creation" is assumed.
Example:
KillDate Write
- New extended "-0<days>" switch for the "NewAreasFrom"
statement.
- OS/2: New parameters "Creation" and "Write" for the Touch
keyword. You can configure the type of "touch" you need.
Examples:
Touch ; default: touch the Creation (upload) date
Touch Creation ; same as default
Touch Write ; touch the Last Write date
Touch Creation Write ; touch both dates
- Fixed bug introduced in 2.32 which caused an access
violation in the "query" type commands if AreaDescWrap
was not used in the config file.
- Added check to prevent access violation when interactive
hatch is used with @diz and CompressCfg is NOT defined.
Now an error is reported.
- Added check to prevent that NEF reports "Empty command"
when no MaxAreaCompile statement is used.
- Enhanced INF Documentation.
ΓòÉΓòÉΓòÉ 2.2. 2.33 ΓòÉΓòÉΓòÉ
2.33 Public Release, Mar 13 1996
- A bug in the squish.cfg parsing routines has been found:
if an area is defined with NOTHING after the path, this
area cannot be opened. The problem usually happens when
AreaTag specifies a *.MSG netmail with NO flags in
Squish.Cfg.
ΓòÉΓòÉΓòÉ 2.3. 2.32 ΓòÉΓòÉΓòÉ
2.32 Public Release, Mar 13 1996
- New registration options: BMT Micro, NC, USA and Vince
Coen, UK.
- If the file description contains high ascii codes
(>127), the announcements will now contain remapped
plain-ASCII characters.
- You can allow High Ascii characters in some (or even
all) areas by the use of the "HighAsciiOk" statement in
the global or local-override announcement sections.
- New (global) statement: UniqueDmpLine.
Makes NEF generate FILES.DMP filebase files with
descriptions on one line only (multiple lines are
concatenated).
By default, NEF outputs multi-line descriptions without
changes to FILES.DMP: when using L)ocate and N)ewfiles
commands, Maximus will respect the original formatting,
but the continuation lines will be aligned to the left.
When this statement is used, the original formatting of
descriptions is lost (in the filebase) but Maximus will
be able to word-wrap and align when executing L)ocate or
N)ewfiles commands.
- Added check to prevent misconfiguration of the "AreaTag"
statement: it's ILLEGAL to use "AreaTag MyTag -$".
You must either use "AreaTag MyTag" (if SquishCfg is
used) or "AreaTag MyTag c:\bbs\mail\mytag -$".
In other words: when you let NEF lookup the TAG in
Squish.cfg, it is smart enough to find out the area type
on its own !
- When hatching from command line, it is now legal to specify
@diz without specifying a short description: it will be
considered empty. I still strongly recommend to always
specify a "short" description besides the optional "long"
one.
Example
Nef Hatch c:\file\filename.ext TAG @diz
is now equivalent to:
Nef Hatch c:\file\filename.ext TAG "" @diz
- Changed a typedef in NEFEAT.H, so that it does not
create problems with IBM compilers (thanks to Michael
Hohner).
- OS/2: New mnemonic characters for PmHatch PushButtons.
ΓòÉΓòÉΓòÉ 2.4. 2.31 ΓòÉΓòÉΓòÉ
2.31 Private Beta, Mar 3 1996
- Fixed problem with UNC filenames that start with a double
backslash (on LANs).
ΓòÉΓòÉΓòÉ 2.5. 2.30 ΓòÉΓòÉΓòÉ
2.30 Public Release, Feb 19 1996
- Check added to prevent NEF from issuing a forward request
to multiple uplinks for the same area, when a TAG is
contained in more than one Filebone file.
- New cfg statement: "ForwardWildReq".
Starting with ver 2.30, by default, TicFix requests with
wildcards are NOT forwarded to the filebones; this verb
enables even this type of request forward.
- Additional check in PmHatch: if no "short" description is
specified, the user is prompted about whether he really
means to hatch with no (short) description.
- Updated Docs.
ΓòÉΓòÉΓòÉ 2.6. 2.26 ΓòÉΓòÉΓòÉ
2.26 Public Beta, Jan 22 1996
- COMPATIBILITY WARNING:
New override priority sequence for "from AKA".
The highest priority is that of the "Area AKA": if you
have defined an area aka (#<address> in FileArea
definition), it will always be the "from address" for
TICs from this area.
Then there is the aka override of "FileLink" definitions.
If a node has a "from aka" specified in it's FileLink
definition, it will be used for all TICs addressed to
this node, unless there is an overriding "Area AKA".
If no override is applicable from FileArea and FileLink
definitions, then an aka match is attempted: if the
"to-address" has a zone that matches an address defined
in NEF.CFG, then the first match is used.
If none of the previous cases applies, the primary
address is used (the first address defined in nef.cfg).
- New command line options for hatch commands.
"@bbs" can be used in the place of the normal
description: NEF will take (if existent) from the
files.bbs.
"@diz" can be used as a further optional parameter (after
the "short" description) to make NEF take the "long"
description from the file_id.diz contained in the
archive.
Examples:
nef hatch d:\apbbs\nef999.rar APBBS "Nef 9.99"
nef hatch d:\apbbs\nef999.rar APBBS @bbs
nef hatch d:\apbbs\nef999.rar APBBS "Nef 9.99" @diz
nef hatch d:\apbbs\nef999.rar APBBS @bbs @diz
- New "Single Hatch" option.
If you Hatch/Catch/Match/Send a file with the -d<adr>
command line switch, it is sent to <adr> only.
<adr> can be any 4D address: in the case it is defined as
a link in the matching "FileArea" or even only as a
"FileLink", the specified akas, password and switches are
applied.
If, on the contrary, <adr> is a unknown address,
the Hold flavour is used, no password is put in
the TIC and the "from" aka is derived from an aka-match
on the zone.
Example: Nef -d2:332/504.2 hatch
- Now NEF is able to add new (created) areas to the Maximus
filearea.ctl or equivalent.
There are two new configuration statements:
MaxAreaAdd <fileareactl> <lev[/keys]> <acs> [<division>]
MaxAreaCompile <command>
<fileareactl> is the fully qualified name of the Maximus
file-area definition file.
<lev[/keys]> protects areas of higher privilege from
being automatically added to the Maximus configuration.
The level and keys are to be compared to those of
ProtArea statements and FileBone files.
<acs> is the Maximus access string to be used in
<fileareactl> for the new area.
<division> is the optional specification of a division
where you want to put new areas. If not specified or not
found, the new areas will be appended at the end of
<fileareactl>.
<command> is an external command to be executed before
NEF ends, from the Maximus system directory.
It should be used to compile the new Maximus
configuration via SILT/SILTP.
The area name is taken equal to the area TAG, with dots
changed to underscores.
The area description is taken from the FileBone files if
available, otherwise it is taken equal to the area TAG.
Example:
MaxAreaAdd d:\max\filearea.ctl 0 Transient Tic.New
MaxAreaCompile siltp max -a -2a
The new areas, will be inserted at the end of division
"Tic.New" in the file "d:\max\filearea.ctl", with an
access string of "Transient". Areas with protection level
above 0 or any protection key will NOT be added to
maximus configuration.
Before terminating, NEF will invoke the SILTP compiler to
update the area configuration. The command will be
executed after changing the current directory to the
Maximus system one (probably d:\max\).
- The filebone-style files now accept the specification of
keys after level.
Example:
Area NODEDIFF 0/f ! FidoNet: Weekly NodeList Updates
- The default message size is of 12KB.
The new cfg statement "MsgSize <bytes>" allows to specify
a different size (minimum 8KB).
Usually a larger message size is useful to avoid too many
messages in reports of filebone availability. Anyway,
please be careful not to use a size larger than your
downlinks can handle.
Example:
MsgSize 90000
- Fast Netmail Scan in Squish area.
The pointer to the last scanned message is stored
in <netarea>.NEF.
- New cfg statement "NoRaidBeforeHatch" to avoid the
scanning of netmail before the execution of hatch
commands. This could be useful to avoid delays with huge
*.MSG netmail areas.
- The tear line now reports the OS version (OS/2 or DOS)
and a '+' after the version number in the case of a
registered copy ("Evaluation" for unregistered copies, as
before).
- Errorlevels for Lock and Close error on message areas
have been dropped: if a Lock error happens, NEF will exit
with the Open area errorlevel; in the case of a Close
error, NEF will continue after issuing an error message.
- TICs received with no password in "NoSecure" mode are
accepted anyway.
- Area aka overrides are reported by the nef filefix robot
when answering to query type commands.
OS/2 Only:
- Added support for Feature DLLs:
Two new configuration statements are supported:
FeatureLoad <DllName>
Feature <cfgline>
"FeatureLoad" allows to load a "Feature" DLL.
<DllName> can be a simple filename without extension
(".DLL" implied) if the DLL is in the LibPath, otherwise
a fully qualified filename can be specified.
"Feature" allows to specify configuration statements that
are to be parsed by the DLL.
Multiple FeatureLoad statements are allowed, in which
case the Feature statements refer to the last loaded DLL.
An Example DLL, named "Feature.Dll" is provided, with
source.
Example (works with the example DLL):
FeatureLoad Feature
Feature OutPrefix "New File Received: "
ΓòÉΓòÉΓòÉ 2.7. 2.21 ΓòÉΓòÉΓòÉ
2.21 Public Beta, Jan 1 1996
- This should be the last beta before a new "final" release.
- COMPATIBILITY WARNING:
The old "AreaList" configuration statement has been dropped.
In some cases you could use the new "HelpFile" statement
to point to the file you used with "AreaList".
- New "HelpFile <file>" configuration statement.
The specified <file> will be sent (via netmail) by the
FileFix robot when help is requested.
- New switches can be used on the subject of messages
addressed to the FileFix robot:
-h to ask for help.
-q remains "query": list of all areas.
-l now means "linked": list of linked areas only.
-u to get a list of unlinked areas only.
Only the first letter is checked, so you could use
"-query" instead of the simple abbreviation "-q".
- New commands are now available in the body of the
messages addressed to the FileFix robot.
Besides add/delete commands for areas, you can use:
%Help same as -h
%Query same as -q
%List same as -q
%Linked same as -l
%Unlinked same as -u
- New "FileBone" support.
NEF is now able to use information distributed via the
FileBone.Na and FileBone.No files.
Many useful functions are allowed by the use of these
files, so, even if you do not receive them from your
uplink, you could evaluate the possibility of creating
"filebone" style files on your own, just to store some
information that can be retrieved by NEF.
- The format for the filebone style is:
Area <Tag> <lev> <flags> <desc>
<Tag> is the TIC area Tag. The original filebone format
allows 8 character maximum but NEF is not that
limited.
<lev> is the protection level of the area, for "filefix"
(raid) functions.
The original format allows the range 0-4095 while
NEF allows 0-65535.
<flags> is a combinaton of !.*& and possibly other
characters.
! : Can be found at any Filebone Hub.
. : Only on some Filebone Hubs.
* : Any node can hatch into.
& : Do not send to downlinks.
Others : Private distribution.
Examples:
! : normal area from the uplink to its downlinks,
available on all Filebone Hubs.
!*& : return channel from the downlinks to their
uplink, available on all Filebone Hubs.
.* : bidirectional area (any node can hatch into),
available on some Filebone hubs only.
<desc> is the description for the area.
Example:
Area APBBS 0 P ApWorks OS/2 BBS programs
Area NODEDIFF 0 ! FidoNet: Weekly NodeList Updates
- New configuration verb:
FileBone <file> [<fm> <to> <toadr> <acc> [<pre>]]
Multiple FileBone statements are possible.
<file> is the filename of the filebone-style file.
If you want to enable the forward of requests for new
areas from your downlinks to your uplink(s), you must
specify the following fields (to be enclosed between
quotes when containing space) so that they can be used to
write netmail messages to your uplink's Raid:
<fm> is the "from" name.
<to> is the "to" name.
<toadr> is the "to" 4D address.
<acc> is a <level>[/keys] specification, to limit the
access of downlinks to request forwards addressed
to <toadr> for the areas described in <file>.
<pre> is an optional string to be prefixed to the area
Tags that are being requested.
Examples:
FileBone \bbs\FileBone.Na "Alberto Pasquale" SysOp 2:332/1 0
The "\bbs\FileBone.Na" file is used by NEF, also for
request forwards.
When a downlink requests an area that is not currently
defined in the NEF configuration (usually TicArea.Cfg)
but is described in FileBone.Na, a netmail message is
written by NEF from "Alberto Pasquale" to "SysOp" of
2:332/1 using the appropriate "from address" aka and
"subject" (password) as per the "FileLink" definition of
2:332/1. The body contains a list of the requested area
Tags, one per line.
No (<acc> = "0") protection is specified (any downlink
has access to request forwards).
FileBone \bbs\FB.SP "Alberto Pasquale" SysOp 2:332/1 30/a +
Only downlinks with level equal or above 30 and with the
'A' key have access to request forwards. The requested
tags will be preceded by "+".
If you need a space between the '+' and the tag, then you
must specify a <pre> that contains a space, so you have
to enclose it in quotes:
FileBone \bbs\FB.SP "Alberto Pasquale" SysOp 2:332/1 0 "+ "
- The forwarded requests are stored in a file named after
the configuration one, changing the extension to ".Fwd".
Usually the configuration file is "Nef.Cfg", so the
forwarded requests will be stored in "Nef.Fwd".
The format is: <Tag> <Addr>, i.e. every line contains a
Tag followed by the 4D Address of the downlink that made
the request.
When a new area is created, NEF looks into this file in
order to find nodes to be added to the new "FileArea"
definition.
- A node is entitled to add an area only if it has level
and keys that match the requirements from BOTH the
"ProtArea" statements in Nef.Cfg and the <lev>
specification in a FileBone file (if available).
- The various area-listing commands will list the
descriptions contained in the FileBone files.
- When the FileFix robot is requested a list of areas that
are not linked, it will list also those available to the
requesting node from the filebone.
- New cfg statement:
AreaDescWrap <indent> <right>
suggested:
AreaDescWrap 25 79
The descriptions returned by the filefix functions will
be word-wrapped so that continuation lines start with
<indent> spaces and do not exceed column <right>.
- New extended syntax for the Netmail statement:
NetMail <path> [-$] [-p<adr>]
The new -p<adr> switch allows to specify a primary
address for the netmail area. NEF will use this address
to write the messages to the FileBone's FileFix to the
correct netmail area.
If you have multiple netmails, please add the primary
address specification in all but the "default" netmail
areas.
- New command line command:
NEF NOTIFY [ALL | <adr> ...]
The Notify command sends a list of linked areas to the
specified links.
Examples:
NEF Notify
NEF Notify All
Sends notification to all links.
NEF Notify 2:332/504 81:449/9108
Sends notifications to the 2 specified addresses.
ΓòÉΓòÉΓòÉ 2.8. 2.20 ΓòÉΓòÉΓòÉ
2.20 Public Beta, Dec 03 1995
- New type of hatch with copy:
If you use "NEF CATCH", the specified file is copied to
the destination area and hatched.
- Multi-Line files.bbs descriptions are now supported.
To enable this feature the way you like, please use the
"MultiLineDesc <nnn> [<c>]" statement, specifying the
continuation column and character.
For example, to have the 2nd and following description
lines in files.bbs start at column 31, use:
MultiLineDesc 31
To have the continuation lines preceded by a '|'
character, use:
MultiLineDesc 29 |
- Modified routines for PassThru clean-up.
Previously passthru areas HAD to be defined using a
separate path for each area. Now NEF works correctly even
if you define many areas with the same path.
Anyway this is not a recommended practice, since slightly
different files with the same name could arrive from
different areas causing a CRC mismatch.
OS/2 Only:
- New Pm Hatch.
To invoke the PM hatch program you must type "NEF send".
The PmHatch program is very simple and intuitive to use:
see the following description.
You can select the destination Area Tag via a drop-down
list: just click with the mouse on the button at the
right of the entry field.
You have three radio buttons to select the "type" of
hatch (normal, with Copy, with Move), just as you use
Hatch/Catch/Match from the command line.
You can choose the file to be hatched via a file dialog
box: just click on the "Browse" push button on the right
of the field.
You can also specify a "Replace" file via a file-dialog
by clicking on the "Browse" push-button on the right of
the "Repl" field.
When doing Copy or Move, the files.bbs of the destination
area is updated and the "replace" file (if specified) is
deleted, just as if the file were tossed from the
inbound.
You can mark the "No Local Kill" checkbox to prevent NEF
from deleting the "replace" file in the local area.
You can load a "short description" (Desc) from the
files.bbs, by clicking on the "FilesBbs" push-button.
You can load a multi-line "long description" (Long Desc)
from the File_Id.Diz inside the archive, from the
Files.Bbs or from a specified file (Arc Diz, FilesBbs,
File push-buttons respectively).
If you do not have the "CompressCfg <filename>" statement
in Nef.Cfg, the "Arc Diz" push-button will be disabled.
Of course you can always fill-in or modify any field
manually.
Now look at the five push-buttons at the bottom of the
hatch dialog:
<OK>: to exit the dialog and hatch all the entered files.
<Prev>: to visualize the previous hatch entry.
<Next>: to create a new (empty) entry in order to hatch
another file.
<Copy>: to copy the visualized entry to the first free
position, in order to hatch another file by
modifying the current entry.
<Cancel> or ESC: to cancel the current entry.
ALT-F4 or "Close", to abort (cancell all the hatch
entries).
- Please note that the PmHatch.Exe file must be in the path
when you invoke "Nef Send". In the case the PmHatch
program terminates abnormally, the NEF program will
wait for it indefinitely: you can stop it using CTRL-C or
CTRL-Break.
- To allow the extraction of File_Id.Diz while using the Pm
Hatch, use the "CompressCfg <filename>" statement to
specify the location and name of a "Squish style"
compress.cfg:
CompressCfg c:\squish\compress.cfg
ΓòÉΓòÉΓòÉ 2.9. 2.19 ΓòÉΓòÉΓòÉ
2.19 Public Beta, Oct 04 1995
- Please note:
APWORKS has changed phone number:
2:332/504@fidonet +39-59-246112 ISDNC/V34/VFC/V32T/H16
2:332/524@fidonet +39-59-246113 ISDNC/V34/VFC/V32T/H16/FAX
A new registration site is available:
Jens Holm of 2:238/888@fidonet
Skanderupgade 9, D2
8660 Skanderborg
Denmark
Price: 125.- DKR.
Can be paid cash, check or postal order.
- ATTENTION: this version is for use with Maximus 3.00;
support for Maximus 2.0x has been dropped. If you still
use Max 2.0x you have to disable filebase support or
continue using version 2.18.
If you do not use Maximus, you can obviously use whatever
version of NEF you like.
- New mutual exclusive semaphore flag "FileBase.Bsy" used
to avoid concurrent access and modification of the
filebase by other ApWorks programs.
There is no need to delete this flag if it is not deleted
after a power failure or abnormal termination (ApWorks
programs are smart enough to realize whether the flag is
really in use or not).
- New errorlevel 17 for FileBase Busy Timeout.
- Support for the "MAXIMUS" environment variable: the
"MaxPrm" cfg statement is now only an override.
Please note that if the "MAXIMUS" variable is not
defined, you must use the "MaxPrm" statement BEFORE
"FileBaseUpdate".
- When the files are touched in HPFS, the creation date is
modified, not the modification one, in order to make the
files recognized as new by Maximus and FLM without
changing the date that is normally shown and transferred:
you "see" and transfer to your downlinks the original
date of the file while Maximus and FLM are able to
realize that the file is new.
- WildTags are now interpreted following the "OS/2 style"
for file wildcards: "*LOC*" specifies all tags that
contain "LOC"; "FW???" specifies all tags that have up
to three characters after "FW", etc.
ΓòÉΓòÉΓòÉ 2.10. 2.18 ΓòÉΓòÉΓòÉ
2.18 Public Beta, Aug 28 1995
- KeepSeenBy statement dropped: SeenBys are now already
kept.
- SeenBys are now always fully processed as they should.
- Points are not included in the SeenBys of TICs addressed
to other links, to avoid unnecessarily huge lists of
SeenBys.
- Fixed bug of Dos 2.17 version that prevented NEF from
moving files between different logical drives.
- Description is now formatted between columns 4 and 79, to
make descriptions with empty lines look better.
- The outbound functions (Out, OutView, Clean) can now
handle 2000 files instead of 1000 (?UT, ?LO).
- PassThru areas implemented: new "-0" option in "FileArea"
statement.
FileArea <TAG> <path> I|O|* [#<adr>] [-0] [[<flags>[link]...]
When the "-0" is specified, the area is "PassThru", that
is its files will be deleted when already sent to all the
downlinks.
Please note that ANY file (apart from FILES.*) present in
<path> and not attached to any system will be deleted.
- Since it might be not efficient to always scan the entire
outbound to check for passthru files to be deleted, NEF
must be instructed to do so.
There are two ways to make NEF delete old passthru files:
- Use -p command line switch.
- Use CLEAN command line command.
Examples:
NEF -p
Makes NEF operate as usual, but it will clean the
PassThru areas before terminating.
NEF -p OUT
Makes NEF clean the PassThru areas and report the status
of Outbound. This is the most efficient use, since NEF
must scan the outbound once to make two different things
("clean passthru" and "outbound report").
NEF CLEAN
Makes NEF clean the PassThru.
- The OUT and OUTVIEW commands are now equivalent for
message output. When using file output ("NEF OUT Out.Txt"
or "NEF OUTVIEW Out.Txt") OUT generates a concise
Outbound analysis (no specification of each and every
attached file), while OUTVIEW generates a full report.
- The <OUT> special tag in "Announce" statements now makes
NEF write a concise outbound report.
- The new <OUTVIEW> special tag provides for a detailed
outbound analysis.
- New special tag <THRU> represents all passthru areas.
If you want to keep NEF from announcing files received
in PassThru areas, just use "NoAnnounce <THRU>".
- New extensions in "NewAreasFrom" statement:
NewAreasFrom <adr> [#<aka>] [-0] [<path>]
The "-0" switch allows to create PassThru areas when a
unknown TAG is encountered.
The <path> is an override for the global "NewAreasPath"
statement.
ΓòÉΓòÉΓòÉ 2.11. 2.17 ΓòÉΓòÉΓòÉ
2.17 Public Beta, Aug 10 1995
- 16 bit versions dropped.
- (OS/2) EAs are now copied together with the file, when it
must be moved from inbound to the destination area.
- Fixed bug that caused newly created areas to be added
multiple times to ticarea.cfg if 2 or more areas were
created at the same time.
- When "MATCHing" a file that is already in its destination
directory, it was deleted. Fixed.
- Multiple "Desc" keywords in the inbound TICs are now
recognized properly. Previously only multiple "LDesc"
keywords were allowed; "Desc" had to be unique.
- The description for FILES.BBS is now always taken from
the "Desc" keyword(s) in the inbound TICs. Previously the
"LDesc" description was used if longer. Reason: many
"LDesc" descriptions contain boxes and look ugly when
reformatted. The Files.BBS description does not allow to
keep formatting (must be on a single line, the BBS
program will reformat according to its configuration).
- The description for announcement messages is the longest
one between "Desc" and "LDesc". Its formatting is now
preserved.
- Now the '*' wildcard used alone does not include special
tags (beginning by '<'). People using "Announce *" will
not be disappointed any further by the announcing of
<BAD> in the same area.
- The Path statement in outgoing TICs contained the ASCII
local (instead of GMT) time specification followed by
"GMT". Now this has been fixed and the "GMT" changed to
"UTC". Please note that you must have the environment
variable "TZ" correctly set in config.sys (OS/2) or
autoexec.bat (DOS) to have a correct specification of
UTC.
E.g. for Central European Time (CET)
SET TZ=CET-01 (winter, normal time)
SET TZ=CET-02 (summer, daylight saving time)
E.g. for USA East Coast:
SET TZ=EST5EDT
Eastern time is 5h less than UTC and Daylight saving
applies with the "standard rule" from the first sunday of
April to the last sunday of October.
More complicate expressions could be used to specify
automatic change to and back from daylight saving, if a
fix rule is available.
E.g. for Italy: daylight is 1h ahead from last sunday of
March to last sunday of September.
SET TZ=CET-01CDT,M3.5.0,M9.5.0
(See a C manual for more details).
- New "NoSecure" (global) cfg statement to disable the
Secure mode. When "NoSecure" is used, NEF will toss
incoming files ignoring errors due to password mismatch
and missing from-authorization (sender not linked, sender
receive only). Anyway the error will be noted in the logs
and <BAD> message report.
- New "-t" command line switch to toggle "Secure" mode.
- New (global) cfg statement "SquishCfg <filename>". It is
used to find the path of a message area from its TAG.
Required to use the new "AreaTag" statement in "short"
form.
- New "AreaTag <Tag> [<path> [-$]]" statement, to be used
in the place of "AreaPath <path> [-$]". You can now
specify an announcement area by using its TAG, as
specified in Squish.Cfg.
e.g.
AreaTag LOCAL_ANNOUNCES
The "long form", with both <Tag> and <path>
specifications is useful in the case you do not use
Squish and still want to tell NEF the TAG for an echo
area, so that it can log it to EchoTossLog.
- New "EchoTossLog <filename>" (global) cfg statement. NEF
will log to the specified file the tags of the echoareas
where it has written announcements. If you use the
"MaxPrm" statement, you can omit "EchoTossLog", since NEF
will take the default from the MaxPrm.
- New "MaxPrm <filename>" (global) cfg statement. It is
used to take the default for EchoTossLog and to get the
name and location of the files necessary for filebase
updating. This is required when using "FileBaseUpdate".
- New "FileBaseUpdate" (global) cfg statement.
Requires "MaxPrm".
NEF will automatically update the filebase for all the
areas changed when tossing/hatching new files. No more
need for external FB.
- New "NoReplace <WTAG> ..." (global) cfg statement.
Multiple statements can be used. The specified <WTAG>s
indicate in which areas you do not want NEF to delete
files specified by the "Replaces" keyword in inbound
TICs.
E.g.: to avoid Replace in all areas:
NoReplace *
ΓòÉΓòÉΓòÉ 2.12. 2.16 ΓòÉΓòÉΓòÉ
2.16 Restricted Beta
- The special tags (e.g. <BAD>, <DEF>) can now be
excluded from announcement via the "NoAnnounce"
statement, just like all the normal tags.
This is useful for people who like announcing all
the areas together ("Announce *") and that were
annoyed by the inclusion of the special tags
also.
ΓòÉΓòÉΓòÉ 2.13. 2.15 ΓòÉΓòÉΓòÉ
2.15 Public Beta, Nov 11 1994
- Be aware that all DOCS refer to version 2.00:
updated documentation will be included in next
version. For now, please read this file to know
new features and changes.
- The former support BBS (Videl, 2:332/504 511 524)
will close in a few days. A new support BBS
(ApWorks) is available with the same old address
2:332/504; V34/VFC +39-59-243882.
New Magics available for NEF beta: NEFBETA (OS/2)
and NEFDBETA (Dos).
- OS/2 versions are now compressed with InfoZip.
- Fixed a problem that occurred when "short
descriptions" (in "Desc" lines) were longer than
255 characters. Nef considered the remaining of
the description as an "unknown" line and put it
in the outbound TICs. Now the remainder of a too
long inbound-TIC line is discarded.
- The "short description" limit has been raised to
2KB (the same as for the "long description").
- When both the "short" (Desc) and "long" (LDESC)
descriptions are available, NEF uses the longer
one for announcements and FILES.BBS. Up to
v.2.14, NEF always used the "long" description
if available.
ΓòÉΓòÉΓòÉ 2.14. 2.14 ΓòÉΓòÉΓòÉ
2.14 Public Beta
- Support for Long Tags
Now the area TAGs are not limited to 8 chars and
can contain any character.
Anyway you should be careful because other
TIC processing programs could not be capable of
handling such long tags.
For sake of completeness, they can even contain
blank spaces: where they could be misinterpreted
as field separating characters, you must include
the whole Tag in quotes: "Long Tag".
See the DOC for more details.
- Hatch/Match (batch mode):
the character for separating the name and the
replace fields has been changed from ',' to '/'.
- The "BefDesc" statement has been substituted by
the "DescStart" one.
Here is a comparison of old and new syntax:
BefDesc <WTAG> [<WTAG> ...] "<string>"
DescStart "<string>" <WTAG> [<WTAG> ...]
- Now there are 4 different EXEs.
NEF.EXE: 32 bit OS/2
NEF16.EXE: 16 bit OS/2
NEFD.EXE: 32 bit DOS, requires DOS4GW.EXE
NEFD16.EXE: 16 bit DOS
- The "areafix" robot ignored messages marked as
sent. Now they are processed, to avoid problems
with netmail packers that mark all messages as
sent, even if they are sent nowhere, being
already arrived at destination.
- New command line switch to override the
"StatusLog" filename: "-l<logname>".
- The maximum length of messages created by robots
before splitting has been elevated to 12KB.
ΓòÉΓòÉΓòÉ 2.15. 2.12 ΓòÉΓòÉΓòÉ
2.12 Beta
- Fixed bug that caused access violations when
doing "NEF Out".
ΓòÉΓòÉΓòÉ 2.16. 2.11 ΓòÉΓòÉΓòÉ
2.11 Beta
- Messages generated by NEF in multiple parts now
have a time stamp that increases one second for
each message part, thus avoiding false duplicate
detection by the buggy dupe check of Squish 1.10.
ΓòÉΓòÉΓòÉ 2.17. 2.10 ΓòÉΓòÉΓòÉ
2.10 Beta
- New function: "Outbound Analysis".
Syntax: NEF OutView [<file>] (verbose)
NEF Out [<file>] (tiny)
If <file> is not specified, the report goes to
message areas. To define a message area for
report, use the "<OUT>" keyword as a TAG. In this
case, the Subj, Prefix and Suffix will be
ignored.
ΓòÉΓòÉΓòÉ 2.18. 2.00 ΓòÉΓòÉΓòÉ
2.00 - First public release for the completely new NEF (OS/2 and
DOS).
- Added the <DEF> and <BAD> special tags for
announcements.
- Documented the NoAnnounce statement (already present in
NEF v1.00).
- Added the Tic processing and Link Robot sections.
ΓòÉΓòÉΓòÉ 2.19. 1.00 ΓòÉΓòÉΓòÉ
1.00 - First public release (DOS only).
ΓòÉΓòÉΓòÉ 3. Copyright ΓòÉΓòÉΓòÉ
**************************************************************
* *
* *
* ** ** ******* ******* *
* *** ** ** * ** * *
* **** ** ** * ** * *
* ** **** **** **** *
* ** *** ** * ** * *
* ** ** ** * ** *
* ** ** ******* **** *
* *
* *
* Version 2.34 *
* *
* File Distribution for "BinkleyTerm Style" Systems *
* *
* *
**************************************************************
* *
* (C) Copyright 1991-1996 by Alberto Pasquale *
* *
* A L L R I G H T S R E S E R V E D *
* *
**************************************************************
"BinkleyTerm" is trademark of Bit Bucket Software, Co.
NEF 2.34 User's Manual, by Alberto Pasquale
ΓòÉΓòÉΓòÉ 4. Introduction ΓòÉΓòÉΓòÉ
INTRODUCTION
-> For licensing information, please see License.Doc.
Thanks for evaluating NEF: a "New Echo Files" distribution
system.
ΓòÉΓòÉΓòÉ 4.1. Main Features ΓòÉΓòÉΓòÉ
Main Features
- It works on systems with a Binkley Style outbound and
*.MSG or Squish message base.
- File Import/Forward/Hatch via the standard .TIC system,
initially implemented by Tick.
- File "Areafix", to automatically link/unlink file areas via
netmail messages. Wildcards can be used to make multiple
link/unlink requests easier.
- Support for "FileBone.Na style" files.
- Automatic forwarding of requests for missing areas to the
uplinks.
- Fast Squish netmail scan.
- Flexible file announcements via echo or netmail messages.
Wildcards in file area tags allow easy configuration of
multiple announcement areas for different groups of file
areas.
- Full multitasking support. File sharing problems are handled
wherever necessary.
- Full 4D operation; no direct support for ancient pointnet
addressing method. However points addressed via pointnet can
obviously be seen with their pointnet adress.
- Different outbounds for different domains are supported the
same way as in Squish, via zone mapping.
- Very flexible MultiAka support. You can use different
addresses in different areas, different addresses for
different downlinks in the same area, etc.
- Outbound analysis and report to message areas and/or file.
- "Passthru" Area support, with optional deletion-age parameter.
- Long Description ("LDESC" keyword) support.
- Multiple "Desc" support.
- Multi-line description support for Files.Bbs.
- EchoToss.Log support.
- Automatic creation of new areas from authorized uplinks.
- Automatic linking of specified downlinks to selected new
areas when they are automatically created.
- Check on imported description strings, to avoid trojan horses
using certain control characters.
- Clean and compact link configuration file.
- Easy addition (on area TAG basis) of text strings at the head
of imported descriptions, to allow inclusion of flags and
download counters in selected areas.
- Easy partial/total area split/merge: you can forward
certain files to a new area TAG.
- Support for Maximus 3.xx FileBase: when the file areas
are modified the filebase is internally updated (no need for
external FB/FBP). The additional UniFiles.Idx (with no
duplicates) created by QFB (my FB/FBP substitute) is also
maintained.
- Automatic addition of new areas to the Maximus 3.xx
configuration.
- Support for Squish configuration file, to get the
information about path, type and primary address of message
areas directly from it.
- (OS/2) Support for "Feature DLLs": developers can find the
necessary Header file and an example C source included in
the NEF package (Nefeat.H, Feature.C, Feature.Dll).
ΓòÉΓòÉΓòÉ 4.2. Credits ΓòÉΓòÉΓòÉ
CREDITS
"BinkleyTerm" is a trademark of Bit Bucket Software Co.
This program uses the Squish "MsgAPI" code, Copyright 1991-1994
by Lanius Corporation. "Squish" and "Maximus" are trademarks of
Lanius Corporation.
"Tick" is Copyright by Barry Geller
The archivers referred-to throughout this documentation are
Copyright and/or trademarks of the respective owners.
ΓòÉΓòÉΓòÉ 4.3. Overall Operation ΓòÉΓòÉΓòÉ
OVERALL OPERATION
When invoked, first of all NEF looks into the netmail area(s)
for netmail messages to the Link Robot (Areafix like) and
executes the commands required; then it looks for new .TIC files
in the netfile area(s) and forwards them.
The ingoing files are moved to their destination directory and
the description is appended to the files.bbs.
A careful check is operated on the text of the description, to
avoid trojan horses that use special control characters.
Existing old descriptions for the ingoing files are deleted.
If the Replaces field is present in the ingoing .TIC (and the
function is not disabled in NEF.CFG), the pertinent file is
erased and its description removed from the files.bbs.
The forwarded TICs will have a new Path line with UTC time of
forward and updated SeenBys; Points are not included in the
SeenBys of TICs addressed to other links, to avoid unnecessarily
huge lists of SeenBys.
The .BSY support avoids conflicts in the outbound, while
possible conflicts in the access to files.bbs are minimized by
waiting several seconds before giving up.
Finally, NEF writes the announcements of the received files;
each message is limited (before splitting) to the maximum size
specified with the "MsgSize" statement (default is 12KB to avoid
problems with old mail processors).
Conflicts on the message base are handled by the Squish MsgAPI.
When the Maximus FileBase support is enabled, a mutual exclusive
semaphore flag "FileBase.Bsy" is used to avoid concurrent access
and modification of the filebase by other ApWorks programs.
There is no need to delete this flag if it remains after a power
failure or abnormal termination (ApWorks programs are smart
enough to realize whether the flag is really in use or not).
ΓòÉΓòÉΓòÉ 4.3.1. From Address Selection ΓòÉΓòÉΓòÉ
From Address Selection
The algorythm to choose the "From" address for the TIC files is:
If an aka ovverride is present in the "FileArea" definition
then use FileArea aka override
else if an aka override is present in the "FileLink" definition
then use FileLink aka override
else if the destination zone matches an "Address" statement
then use the zone-matching address
else
use the primary (first) "Address" statement.
ΓòÉΓòÉΓòÉ 4.3.2. Description Handling ΓòÉΓòÉΓòÉ
Description Handling
The TIC files can contain "Desc" and "LDesc" lines. Usually the
description contained in "Desc" line(s) is short and
unformatted, while that carried by the "LDesc" lines is long,
multi-line and formatted.
For the announcements, the longest one is selected.
For the Files.Bbs: if MultiLineDesc support is enabled, the
longest description is used, otherwise the "Desc" one.
ΓòÉΓòÉΓòÉ 5. Installation ΓòÉΓòÉΓòÉ
INSTALLATION
1) There are 3 versions of NEF: OS/2, NT and DOS/32, distributed
in different archives. The main program is always named
NEF.EXE: please make sure you have the correct version.
2) Edit your Nef.Cfg.
You can find useful examples in the NEF_*.Cfg files and
detailed information in the "CFG REFERENCE" section of this
documentation.
3) Edit your batch file in order to call NEF whenever you would
like to test for the presence of .TIC files in your inbounds
and process them. If you do not pass a different pathname as
a command line parameter, Nef.Cfg must reside in the current
directory.
4) (OS/2): Make sure you have the MSGAPI32.DLL in a directory
contained in your LIBPATH and the PmHatch.Exe program in
your PATH. MSGAPI32.DLL can be found in the Squish 1.11
archive (SQSHP111.LZH).
(NT): Make sure you have the MSGAPINT.DLL in a directory
contained in your PATH. MSGAPINT.DLL can be found in the
Max 3.01 for Windows archive (MAX301N.ZIP).
(DOS): Make sure you have the DOS4GW.EXE Dos extender (from
Rational System Inc.) in your path.
The DOS4GW extender requires an XMS or DPMI memory driver
installed in your config.sys: e.g. HIMEM.SYS, QEMM (by
QuarterDeck Office Systems Inc.).
5) In order to have a correct UTC time specification in your
outgoing TICs, please note that you must have the environment
variable "TZ" correctly set in config.sys (OS/2) or
autoexec.bat (DOS).
E.g. for Central European Time (CET):
SET TZ=CET-01 (winter, "normal" solar time)
SET TZ=CET-02 (summer, daylight saving time).
E.g. for USA East Coast:
SET TZ=EST5EDT
Eastern time is 5h less than UTC and Daylight saving
applies with the "standard rule" from the first sunday o
april to the last sunday of october.
More complicate expressions might be used to specify
automatic change to and back from daylight saving, if a fixed
rule is available.
E.g. for Central Europe: daylight saving is 1h ahead from the
last sunday of march to the last sunday of october.
SET TZ=CET-01CDT,M3.5.0,M10.5.0
(See a C manual for further details).
ΓòÉΓòÉΓòÉ 6. The Command Line ΓòÉΓòÉΓòÉ
Command Line OPTIONS and SWITCHES
To get help about the command line syntax, use the "-h" or "-?"
command line switch: type "NEF -h" or "NEF -?".
The following forms are available:
NEF [<sw>]
NEF [<sw>] NOTIFY [<adr> ...]
NEF [<sw>] OUT|OUTVIEW [<file>]
NEF [<sw>] CLEAN
NEF [<sw>] HATCH|MATCH|CATCH|SEND
NEF [<sw>] HATCH|MATCH|CATCH <name>[/<repl>] <TAG> [<desc>] [@DIZ]
where:
<sw> is one or more of:
-c<cfg>
Use <cfg> as configuration file instead of the
default "Nef.Cfg".
Example: "Nef -ce:\cfg\nef2.cfg"
-d<adr>
Hatch to <adr> only.
If you Hatch/Catch/Match/Send a file with the
-d<adr> command line switch, it is sent to <adr>
only.
<adr> can be any 4D address: in the case it is
defined as a link in the matching "FileArea" or
even only as a "FileLink", the specified akas,
password and switches are applied.
If, on the contrary, <adr> is a unknown address,
the Hold flavour is used, no password is put in
the TIC and the "from" aka is derived from an
aka-match on the zone.
Example: "Nef -d2:332/589 hatch"
-h or -?
Help.
-k
Keep local files (do not Replace,
for Match/Catch).
-l<log>
Use <log> as logfile instead of the one specified
via the "StatusLog <log>" configuration statement.
Example: "Nef -le:\cfg\nef.log"
-p
Clean passthru areas before terminating, see also
the "CLEAN" option.
Examples:
NEF -p
NEF -p OUT
-t
Toggle Secure mode (see also the NoSecure cfg
statement).
A description of options follows:
NOTIFY
Notify linked areas to the specified address list,
where <adr> is a 4D address.
If no address is given or "ALL" is specified, NEF
will notify to all defined links.
OUT
Outbound analysis (message output), optional
concise output to <file> (no specification of each
and every attached file). See the <OUT> and
<OUTVIEW> "special tags" in the "Announce"
section.
OUTVIEW
Same as OUT, but optional output to <file> is
verbose.
CLEAN
Clean passthru areas.
Since it might be not efficient to always scan the
entire outbound to check for passthru files to be
deleted, NEF must be explicitly instructed to do
so (see also the "-p" command line switch).
Example: "Nef Clean"
HATCH
Traditional hatch.
MATCH
Move file to destination area then hatch.
CATCH
Copy file to destination area then hatch.
SEND
(OS/2) Hatch via PM Dialog.
If you use one of these hatch options, NEF will
not process inbound .TICs; instead it will send
the specified files to your links.
Examples:
"Nef Hatch"
"Nef Match"
"Nef Catch"
"Nef Send" (OS/2 Only)
When no parameters are specified after the hatch
option, your interaction is required: you will be
requested the filename specification (Dos or OS/2
wildcards allowed) and, for each matching file,
the optional "replace" name, the area TAG, the
description and the optional "Long Description".
On the other hand, if you specify the hatch
parameters on the command line, you cannot give a
"Long Description" apart from that taken from the
File_Id.Diz.
HATCH sends the specified files; they are not
moved and their description is not modified.
MATCH moves the specified files to the directory
that corresponds to the specified <TAG>, updates
their descriptions (see "Description Handling" in
Overall operation) and sends them as per normal
hatch. If a <replace> file is specified, it is
deleted with its associated description.
CATCH is just like Match, but the files are copied
instead of moved.
(OS/2)
SEND allows to specify all the hatch parameters
via a user friendly PM Dialog. Please make sure
the PmHatch.Exe file is in the PATH. In the case
the PmHatch program terminates abnormally, the NEF
program will wait for it indefinitely: you can
terminate it using CTRL-C or CTRL-Break.
See the "PmHatch" section below for further
information.
Parameters for Hatch/Match/Catch:
<name>
This is the full pathname of the files you want to
H/M/Catch. You need to specify the full path even
if you are hatching files that reside in the
directory corresponding to <TAG>. O.S. wildcards
are allowed.
<replace>
This is the optional name of the file to be
replaced: if the receiving system has this feature
enabled, a file named <replace> in the <TAG> area
will be deleted while importing the new file.
<TAG>
This is the tag used for distributing an echo-file
area.
<desc>
This is the "short" file description and must be
enclosed between quotes '"'.
In the case you need to include the '"' character
in the description, just precede it with a
backslash escape character: '\"'.
If you want to take this description from the
files.bbs, you can just specify "@BBS".
Although NEF allows not to specify any <desc>, it
is highly recommended that a "short" description
is supplied, even when a "long" one is used.
@DIZ
This parameter allows to (optionally) take a
"long" description from the File_Id.Diz contained
in archive <name>.
Please note that this is an additional OPTIONAL
field, while <desc> should be MANDATORY (although
NEF does not complain about a missing <desc>).
Note:
Please realize that the "short" and "long"
descriptions are two separate and indipendent
items.
Short description: single line, "Desc" keyword in
TIC files.
Lond description: multiple lines, "Ldesc" keywords
in TIC files.
ΓòÉΓòÉΓòÉ 6.1. Examples ΓòÉΓòÉΓòÉ
Examples:
NEF Hatch d:\p\prg12.rar/prg11.rar COMMS "New comm prg"
d:\p\prg12.rar is hatched (NOT moved) into the COMMS
area; prg11.rar will be deleted on receiving systems.
NEF Catch d:\p\prg12.rar/prg11.rar COMMS "New comm prg"
d:\p\prg12.rar is copied to the directory corresponding
to the COMMS file area and is hatched to the COMMS area.
prg11.rar is deleted locally and will be deleted on
receiving systems.
NEF Match d:\p\prg12.rar COMMS "New comm prg"
d:\p\prg12.rar is moved to the directory corresponding
to the COMMS file area, it is hatched to the COMMS area,
no replace information is put in the outgoing .TICs.
NEF Send
(OS/2) Invokes the PM dialog window.
NEF Hatch d:\apbbs\nef999.rar APBBS @bbs
d:\apbbs\nef999.rar is hatched into the APBBS area,
taking the description from the files.bbs.
NEF Hatch d:\apbbs\nef999.rar APBBS "Nef 9.99" @diz
d:\apbbs\nef999.rar is hatched into the APBBS area,
taking "Nef 9.99" as the "short" description and the
File_Id.Diz (if present in the archive) as the "long"
description.
NEF Hatch d:\apbbs\nef999.rar APBBS @bbs @diz
d:\apbbs\nef999.rar is hatched into the APBBS area,
taking the "short" description from the files.bbs and
the "long" description from the File_Id.Diz (if it is
contained in the archive).
NEF -d2:332/504.2 Hatch d:\apbbs\nef999.rar APBBS @bbs @diz
Same as above, but the file is hatched to 2:332/504.2
only.
NEF OUT
An outbound analysis is performed, the results are
reported via messages in the area(s) configured in
Nef.Cfg (see the Announce statement).
NEF OUT Out.Txt
Same as above, but the output is also written to
"Out.Txt" in "concise mode".
NEF OUTVIEW Out.Txt
Same as above but the file output is verbose.
NEF -p OUT
NEF will report the status of the outbound and clean the
passthru areas.
If you need to maintain passthru areas, this is the most
efficient use, since NEF must scan the outbound once to
make two different things ("clean passthru" and
"outbound report").
NEF Notify
NEF Notify All
A notification message is sent to all the defined links,
specifying the linked areas.
NEF Notify 2:332/589 1:234/567
A notification message is sent to the specified links.
ΓòÉΓòÉΓòÉ 6.2. PmHatch ΓòÉΓòÉΓòÉ
PmHatch
OS/2 Only:
To invoke the PM hatch program you must type "NEF send".
The PmHatch program is very simple and intuitive to use:
see the following description.
You can select the destination Area Tag via a drop-down
list: just click with the mouse on the button at the
right of the entry field.
You have three radio buttons to select the "type" of
hatch (normal, with Copy, with Move), just as you use
Hatch/Catch/Match from the command line.
You can choose the file to be hatched via a file dialog
box: just click on the "Browse" push button on the right
of the field. The file dialog starts from the directory
corresponding to the selected Tag, but you can move to
any drive or directory.
You can also specify a "Replace" file via a file-dialog
by clicking on the "Browse" push-button on the right of
the "Repl" field.
When doing Copy or Move, the files.bbs of the
destination area is updated and the "replace" file (if
specified) is deleted, just as if the file were tossed
from the inbound.
You can mark the "No Local Kill" checkbox to prevent NEF
from deleting the "replace" file in the local area.
You can load a "short description" (Desc) from the
files.bbs, by clicking on the "FilesBbs" push-button.
You can load a multi-line "long description" (Long Desc)
from the File_Id.Diz inside the archive, from the
Files.Bbs or from a specified file (Arc Diz, FilesBbs,
File push-buttons respectively).
If you do not have the "CompressCfg <filename>"
statement in Nef.Cfg, the "Arc Diz" push-button will be
disabled.
Of course you can always fill-in or modify any field
manually.
Now look at the five push-buttons at the bottom of the
hatch dialog:
<OK>: to exit the dialog and hatch all the entered files.
<Prev>: to visualize the previous hatch entry.
<Next>: to create a new (empty) entry in order to hatch
another file or to move to next entry if <Prev> has been
used.
<Copy>: to copy the visualized entry to the first free
position, in order to hatch another file by modifying
the current entry.
<Cancel> or ESC: to cancel the current entry.
ALT-F4 or "Close", to abort (cancel all the hatch
entries).
ΓòÉΓòÉΓòÉ 6.3. Errorlevels ΓòÉΓòÉΓòÉ
ERRORLEVELS
0 - File areas modified: Match or .TIC processed.
1 - File areas not modified: Hatch or NO .TIC processed.
2 - Help requested.
3 - Abnormal termination
4 - Configuration file not found.
5 - Invalid parameter on command line.
6 - No Outbound defined in cfg file.
7 - Disk Full.
8 - Out of Memory.
9 - Can't open Log file.
10 - Prefix or Suffix too long.
11 - User Input Error (interactive hatch/match).
12 - TimeOut waiting for concurrent NEF process to finish.
13 - Error while accessing .SAV file.
17 - FileBase Busy TimeOut.
250 - MsgApi: Init Error.
251 - MsgApi: Area Open Error.
ΓòÉΓòÉΓòÉ 7. Cfg Reference ΓòÉΓòÉΓòÉ
CFG REFERENCE
Before analyzing the cfg keywords in detail, let's introduce the
overall mechanism that is at the basis of NEF's file forwarding
capabilities.
Each area (defined via the FileArea keyword) can be
mono-directional or bi-directional.
In bidirectional areas every link can send files to us and we
forward to everyone, unless those with a "receive-from"
override.
Monodirectional areas can be "receive from everyone" or "send to
everyone". Obviously, at least one link must have an override in
the opposite direction, unless we are the destination or
origination of all the files.
NEF uses the three flags 'I' (Input: we accept from), 'O'
(Output: we send to) and '*' (bidirectional) to define the
direction of an area or link.
Each area has a direction, that can be overridden on a per-node
basis by a global (in the FileLink statement) or local (in the
FileArea statement, before the pertinent link address) direction
override.
In other words: each link has a direction that is defined in
order of priority (from lowest to highest) by the area direction
(I|O|* in FileArea), the global link override (in the FileLink
statement), the local link override (before link address in the
FileArea statement).
It is recommended not to use the global link override when not
really useful, so that the area definition statements remain
clearly readable without the need to keep one eye on the
FileLink statements.
Usually the global link override is useful when you have an
uplink for many areas. For example: if one day the uplink and
one of the downlinks switch their role, you have to move the 'I'
flag from one FileLink statement to the other with no need to
change all the area definitions.
The area direction definition is very useful to allow automatic
linking via the Link Robot both to normal "Uplink to Downlinks"
areas and to reverse "Downlinks to Uplink" areas (mostly used
for "pre" areas to collect files and send them to the
coordinator).
As a matter of facts, in response to a link request, the Link
Robot only adds the requesting address (with no flags) to the
FileArea statement. So the real characteristics of the link
depend on the Area direction and on the link flags (FileLink
statement).
ΓòÉΓòÉΓòÉ 7.1. Conventions ΓòÉΓòÉΓòÉ
Conventions
- Items between square brackets (e.g. [<item>]) are optional.
- Items separated by '|' are mutually exclusive (e.g. I|O|*).
- The names of the various Keywords are NOT case sensitive.
- The area TAGs are NOT case sensitive.
Please be aware that old TIC processors might not be able to
handle tags longer than 8 characters or containing dots.
- <WTAG> is a "Wild TAG" specification: it can be a normal area
TAG or contain wildcards in the "OS/2 style".
Examples:
"*LOC*" specifies all tags that contain "LOC".
"FW???" specifies all tags that have up to three characters
after "FW".
- When a directory path is required, the trailing backslash '\'
is optional.
- The ';' character starts comments: any character following the
';' is ignored. Please note that configuration text strings
(e.g. Subj, Origin) can contain the ';' character provided
they are enclosed in quotes '"'.
- The maximum length of configuration lines (including FileArea
definitions) is 510 characters.
- ... means that you can list further items of the same type.
- Unless differently specified, addresses are standard 4D and
MUST begin with the zone number (FileArea statements excluded).
Please, note that the order of the configuration statements
follows some logical rule. In order not to create confusion in
the .cfg file and not to break some _necessary_ order relation,
please follow the scheme proposed in the example NEF_*.CFG files
and in this reference documentation.
ΓòÉΓòÉΓòÉ 7.2. System ΓòÉΓòÉΓòÉ
S Y S T E M
ΓòÉΓòÉΓòÉ 7.2.1. RegKey ΓòÉΓòÉΓòÉ
RegKey <RegKey>
Registered Users only: <RegKey> is the registration key
and it is NOT case sensitive.
Example:
RegKey dfhyuwru6274623
ΓòÉΓòÉΓòÉ 7.2.2. Address ΓòÉΓòÉΓòÉ
Address <Address>
You can use as many Address statements as you need for
all of your AKAs. The first one specifies the "primary"
address. <Address> is a standard 4D address
specification.
Example:
Address 2:332/504.0 ; Primary Address
Address 2:332/524.0 ; Second line aka
Address 2:332/500.0 ; Hub aka
Address 9:999/999.9 ; one more aka
ΓòÉΓòÉΓòÉ 7.2.3. StatusLog ΓòÉΓòÉΓòÉ
StatusLog <LogFile>
<LogFile> is the name of the file where all the
operations performed by NEF will be logged, following
the "Binkley Style".
In multitasking environments, please be sure to use a
file that cannot be used by other processes at the same
time. For example: if (in your system) NEF can be
executed while Binkley is running, please use different
log files.
Multiple NEF processes using the same config file
(and therefore the same <LogFile>) will have no problem
since NEF does not begin operations until the previous
launched instance (if it uses the same .cfg file) has
finished.
Should you not want the log file, you can comment this
keyword out.
Example:
StatusLog d:\bbs\log\nef.log
ΓòÉΓòÉΓòÉ 7.2.4. EchoTossLog ΓòÉΓòÉΓòÉ
EchoTossLog <filename>
When a message is written into echoareas defined with
the "AreaTag" statement, the corresponding
TAGs are written (one per line) to <filename>.
If you use the "MaxPrm" statement (or MAXIMUS
environment variable), "EchoTossLog" is not necessary
and becomes an override of the echotosslog specification
found in the Maximus .PRM file.
If you do not like this output, you can override with
the NUL name: "EchoTossLog NUL".
Example:
EchoTossLog d:\bbs\squish\echotoss.log
ΓòÉΓòÉΓòÉ 7.2.5. NetFile ΓòÉΓòÉΓòÉ
NetFile <InboundDir>
You can specify as many NetFile statements as you need,
one for each inbound directory where NEF must look for
new .TIC files.
<InboundDir> is the pathname of the inbound directory.
Example:
NetFile c:\file\net
ΓòÉΓòÉΓòÉ 7.2.6. Outbound ΓòÉΓòÉΓòÉ
OutBound <RootPath> [<Zone>]
The outbound directories are specified with the same
method as in squish.cfg.
<RootPath> should not have an extension.
The first OutBound statement does not have the <Zone>
field and specifies the directory where NEF will build
file attaches for the zone of the primary address.
Subsequent OutBound statements must have the <Zone>
field (Decimal). File attaches for the specified <Zone>
are built in <RootPath>.<###>, where <###> is a 3 digit
extension representing the zone number (hexadecimal).
File attaches for zones different from the primary one
and not matching any <Zone> of the OutBound statements
are built in <RootPath>.<###>, where <RootPath> is the
one specified in the first OutBound statement and <###>
is a 3 digit extension representing the hexadecimal
zone number.
Note:
The "OutBound" statements MUST be preceded by the
"Address" ones.
Example:
OutBound c:\out\fidonet
OutBound c:\out\amiganet 39
OutBound c:\out\amiganet 40
FileAttaches will be built in:
Primary zone -> c:\out\fidonet
zone 39 -> c:\out\amiganet.027
zone 40 -> c:\out\amiganet.028
other zones -> c:\out\fidonet.<###>
where <###> is the 3 digit hexadecimal
representation of the zone number
ΓòÉΓòÉΓòÉ 7.2.7. TicHold ΓòÉΓòÉΓòÉ
TicHold <TicDir>
This specifies the directory that holds all the .TIC
files addressed to downlinks until they are sent and
erased.
Example:
TicHold c:\file\tichold
ΓòÉΓòÉΓòÉ 7.2.8. BusyFlag ΓòÉΓòÉΓòÉ
BusyFlags
This enables the Binkley-Style .BSY support.
When attaching a file to a node, the presence of an
appropriate .BSY file is checked; if it is present, some
other process may be working on the same node, so NEF
saves the attach info to a private <config>.SAV file
(i.e. NEF.SAV when NEF.CFG is the config file). On
subsequent runs, NEF will look for a <config>.SAV file
and use the information in it to attempt again the
creation of the file attaches.
If the .BSY file is not found, it is created, the file
attach is built, then the .BSY is erased.
The name of the .BSY file is the same as a file attach
to the same node: only the extension changes.
Warning:
The .BSY method has a nasty drawback: if the process
that has created a .BSY file hangs or is shutdown
abruptly, the .BSY file remains in its outbound
directory, so that no other process will gain access to
that node until somebody erases the .BSY file. It is
advisable to delete *.BSY from the most used outbound
directories at startup (in autoexec.bat (Dos) or
startup.cmd (OS/2)).
ΓòÉΓòÉΓòÉ 7.2.9. NoRaidBeforeHatch ΓòÉΓòÉΓòÉ
NoRaidBeforeHatch
Skips the scanning of netmail before the execution of
hatch commands. This might be useful to avoid delays
with huge *.MSG areas.
ΓòÉΓòÉΓòÉ 7.2.10. MsgSize ΓòÉΓòÉΓòÉ
MsgSize <bytes>
To specify the maximum size (in bytes) for a message
generated by NEF (minimum 8KB, default 12KB).
Usually a larger message size is useful to avoid too many
messages in reports of filebone availability. Anyway,
please be careful not to use a size larger than your
downlinks can handle.
Example:
MsgSize 90000
ΓòÉΓòÉΓòÉ 7.2.11. TicAreaCfg ΓòÉΓòÉΓòÉ
TicAreaCfg <filename>
This defines the name of the file that contains all the
file area definitions. See the "FileArea" keyword below
for a description of the syntax.
This keyword is optional: if you omit it, you can define
your file areas directly in the .cfg file, provided you
put all the FileArea statements _after_ the FileLink
ones, at the end of the .cfg file.
For systems with few areas the one-file configuration is
handy, for systems with many areas and links, the
separate file solution is recommended.
Please note that the TicAreaCfg file can contain
FileArea statements and comments ONLY.
Example:
TicAreaCfg d:\bbs\nef\ticarea.cfg
ΓòÉΓòÉΓòÉ 7.2.12. CompressCfg ΓòÉΓòÉΓòÉ
CompressCfg <filename>
(OS2)
To allow the extraction of File_Id.Diz while using the
Pm Hatch.
<filename> must specify the location and name of a
"Squish style" compress definition file.
In the case you are using a case-sensitive
de/compression program (e.g. OS/2 ZIP/UNZIP), please
make sure to use the correct switches in <filename>.
If you are already using Squish and or Maximus, you
can just specify the name of their compress.cfg (but do
check that they indicate the necessary switches to avoid
case sensitiveness during extraction).
Refer to the "Compress Definition File" section at the
end of this reference for the syntax of this
configuration file.
Example:
CompressCfg c:\squish\compress.cfg
ΓòÉΓòÉΓòÉ 7.2.13. Squish Support ΓòÉΓòÉΓòÉ
Optional Squish Support
ΓòÉΓòÉΓòÉ 7.2.13.1. SquishCfg ΓòÉΓòÉΓòÉ
SquishCfg <filename>
It is used to specify the squish configuration file, so
that the path, type (SDM vs Squish) and primary address
for the announcement areas defined with the "AreaTag"
statement can be automatically looked up.
When SquishCfg is defined, if you use "AreaTag <Tag>" to
define announcement areas, the "FromNode <adr>"
statement is only used to override the primary address
specified for that area in Squish.Cfg (including the
-p<address> overrides).
The "Include" keyword of Squish.Cfg is supported: just
be sure to always use the full pathname in the Include
statement if different from the working path.
Both echomail and netmail areas are recognized by their
Squish tags.
Netmail areas will have the Private attribute and no
origin by default. Local overrides are still possible
via local "Origin" and "Attr" statements.
Example:
SquishCfg c:\squish\squish.cfg
ΓòÉΓòÉΓòÉ 7.2.14. Maximus 3.xx Support ΓòÉΓòÉΓòÉ
Optional Maximus 3.xx Support
ΓòÉΓòÉΓòÉ 7.2.14.1. MaxPrm ΓòÉΓòÉΓòÉ
MaxPrm <filename>
If the MAXIMUS environment variable is defined, this
statement is an optional override only.
It is used to take the default for EchoTossLog and to
get the name and location of the files necessary for
filebase updating. The ".prm" extension in <filename>
can be omitted.
Example:
MaxPrm d:\bbs\max\max.prm
ΓòÉΓòÉΓòÉ 7.2.14.2. MaxAreaAdd/MaxAreaCompile ΓòÉΓòÉΓòÉ
MaxAreaAdd <fileareactl> <lev[/keys]> <acs> [<division>]
MaxAreaCompile <command>
NEF is able to add new (created) areas to the Maximus
filearea.ctl or equivalent.
<fileareactl> is the fully qualified name of the Maximus
file-area definition file.
<lev[/keys]> protects areas of higher privilege from
being automatically added to the Maximus configuration.
The level and keys are to be compared to those of
ProtArea statements and FileBone-format files.
<acs> is the Maximus access string to be used in
<fileareactl> for the new area.
<division> is the optional specification of a division
where you want to put new areas. If not specified or not
found, the new areas will be appended at the end of
<fileareactl>.
<command> is an external command to be executed before
NEF ends, from the Maximus system directory.
It should be used to compile the new Maximus
configuration via SILT/SILTP.
The area name is taken equal to the area TAG, with dots
changed to underscores.
The area description is taken from the FileBone-format
files if available, otherwise it is taken equal to the
area TAG.
Example:
MaxAreaAdd d:\max\filearea.ctl 0 Transient Tic.New
MaxAreaCompile siltp max -a -2a
The new areas, will be inserted at the end of division
"Tic.New" in the file "d:\max\filearea.ctl", with an
access string of "Transient". Areas with protection level
above 0 or any protection key will NOT be added to
maximus configuration.
Before terminating, NEF will invoke the SILTP compiler to
update the area configuration. The command will be
executed after changing the current directory to the
Maximus system one (probably d:\max\).
ΓòÉΓòÉΓòÉ 7.2.14.3. FileBaseUpdate ΓòÉΓòÉΓòÉ
FileBaseUpdate
Requires the MAXIMUS environment variable or the
"MaxPrm" statement _before_ in the cfg.
NEF will automatically update the filebase for all the
areas changed when tossing/hatching new files. No more
need to run external FBP (FB).
Example:
FileBaseUpdate
ΓòÉΓòÉΓòÉ 7.2.14.4. UniqueDmpLine ΓòÉΓòÉΓòÉ
UniqueDmpLine
Forces the generation of FILES.DMP filebase files with
descriptions on one line only (multiple lines are
concatenated).
By default, multi-line descriptions are output without
changes to FILES.DMP: when using L)ocate and N)ewfiles
commands, Maximus will respect the original formatting,
but the continuation lines will be aligned to the left.
When this statement is used, the original formatting of
descriptions is lost (in the filebase) but Maximus will
be able to word-wrap and align when executing L)ocate or
N)ewfiles commands.
ΓòÉΓòÉΓòÉ 7.3. Tic Processing ΓòÉΓòÉΓòÉ
TIC Processing
ΓòÉΓòÉΓòÉ 7.3.1. NoSecure ΓòÉΓòÉΓòÉ
NoSecure
Disables the secure mode.
When "NoSecure" is used, NEF will toss incoming files
ignoring errors due to missing password, password
mismatch and missing from-authorization (sender not
linked, sender receive only).
You can also use the "-t" command line switch to toggle
between Secure and NoSecure modes.
Anyway the error will be noted in the logs and <BAD>
message report (see Announce statement).
Example:
NoSecure
ΓòÉΓòÉΓòÉ 7.3.2. NoReplace ΓòÉΓòÉΓòÉ
NoReplace <WTAG> ...
Multiple statements can be used.
The specified <WTAG>s indicate in which areas you do not
want NEF to delete files specified by the "Replaces"
keyword in inbound TICs.
Example:
NoReplace * ; to avoid Replace in all areas
ΓòÉΓòÉΓòÉ 7.3.3. CheckCRC ΓòÉΓòÉΓòÉ
CheckCRC
This enables the CRC check of ingoing .TICs.
If an ingoing .TIC has the CRC keyword, the specified
CRC is checked against that of the relative file and an
error is reported in case of mismatch.
Outgoing .TICs will have the CRC only if it is present
in the ingoing one.
TICs originated by NEF (various Hatch modes) will always
have the CRC keyword.
ΓòÉΓòÉΓòÉ 7.3.4. Touch ΓòÉΓòÉΓòÉ
Touch [Creation] [Write]
Ingoing files are "touched" while being moved to their
destination directory (i.e. their timestamps are set to
NOW, so that they will be seen as new files by all the
utilities that use the file date-time to compute the age
of files).
(OS/2)
There are two optional parameters ("Creation" and
"Write") that allow to configure the type of touch
needed to best suit your environment.
"Creation" -> touch the creation (upload) date
"Write" -> touch the last-write (modification) date
You can specify either or both options.
When no parameter is used, "Creation" is assumed.
On FAT, the only available date (last-write) is touched
regardless of the Touch options.
On HPFS, the specified date(s) is/are touched.
Usually, you do not need to specify any touch parameter,
so that NEF touches the creation date, not the
modification one, in order to make the files recognized
as new by Maximus and FLM (my File List Manager) without
changing the date that is normally shown and
transferred: you "see" and transfer to your downlinks
the original date of the file while Maximus and FLM are
able to realize that the file is new.
WARNING: if you use some other utility that is not smart
enough to recognize new files from the creation date,
you might need to specify both the "Write" and
"Creation" options.
(NT, DOS & OS/2 FAT)
Warning: The original file timestamp is lost and the
downlinks will receive the forwarded files with the new
timestamps.
Examples:
Touch ; default: touch the Creation (upload) date
Touch Creation ; same as default
Touch Write ; touch the Last Write date
Touch Creation Write ; touch both dates
ΓòÉΓòÉΓòÉ 7.3.5. KillDate ΓòÉΓòÉΓòÉ
KillDate Write|Creation
(OS/2)
When the -0<days> switch is used in a FileArea
definition, this statement specifies which date must be
used to evaluate the file age.
This setting is useful for HPFS (which has separate
Write and Creation dates) and ignored for FAT.
If not specified, "Creation" is assumed.
Attention: if you want to delete the files when they
have been on your system for <days> days then you should
choose a date that has been touched on toss (as per
Touch statement).
Examples:
KillDate Write ; Use the Write date
KillDate Creation ; same as default
ΓòÉΓòÉΓòÉ 7.3.6. MultiLineDesc ΓòÉΓòÉΓòÉ
MultiLineDesc <nnn> [<c>]
By default, files.bbs description must be on a single
line; this statement enables Multi-Line support.
<nnn> is the number of spaces that must precede the
continuation lines.
<c> is the continuation character.
If <c> is NOT specified, it is assumed that the
continuation lines must be preceded by <nnn> spaces.
If <c> IS specified, it is assumed that the continuation
lines must be preceded by <nnn> spaces, the <c>
character and one more space.
For example, to have the 2nd and following description
lines in files.bbs start at the 32nd column, use:
MultiLineDesc 31
A description in files.bbs would be like:
Test.Zip This is the first description line
this is the 2nd line
this is the 3rd line
^ ^^
1 31 32
To have the continuation lines preceded by a '|'
character, use:
MultiLineDesc 29 |
A description in files.bbs would be like:
Test.Zip This is the first description line
| this is the 2nd line
| this is the 3rd line
^ ^ ^
1 29 32
ΓòÉΓòÉΓòÉ 7.3.7. NewAreasPath/NewAreasFrom ΓòÉΓòÉΓòÉ
NewAreasPath <path>
NewAreasFrom <address> [-0[<days>]] [#<aka>] [<path>]
<path> is the base directory for new file areas
automatically created by NEF on reception of .TICs with
unknown area TAGs.
<address> is a 4D address that must be enabled to
automatically create new areas.
-0[<days>] (zero) specifies that areas created by
<address> must be PassThru. The optional <days>
parameter specifies that the files in these areas must
not be deleted before they become older than <days>.
<days> is an integer <= 65535.
<aka> is the optional from-address to be used by NEF in
outgoing .TICs for the areas automatically created by
<address>.
The <path> in "NewAreasFrom" is an override for the
default specified in "NewAreasPath".
Any number of NewAreasFrom statements can be used.
While adding new areas, NEF will NOT re-order the
existing ones, anyway it will respect an existing
alphabetical order.
Example:
NewAreasPath c:\file
NewAreasFrom 2:331/110
NewAreasFrom 9:1/1 #9:999/999.9
NewAreasFrom 9:2/2 -0 d:\fido\passthru\
Let's suppose we have received a .TIC for area NEWAREA,
which is not currently defined:
- if it is coming from an address different from
2:331/110, 9:1/1 and 9:2/2 -> an error is reported.
- if it is coming from 2:331/110 -> a new area is
created with path c:\file\NEWAREA.
- if it is coming from 9:1/1 -> a new area is created
with path c:\file\NEWAREA and it is configured so that
NEF will use 9:999/999.9 (which must be an aka
previously defined in an Address statement) as the
from-address for outgoing .TICs.
- if it is coming from 9:2/2 -> a passthru area is
created with path d:\fido\passthru\NEWAREA.
ΓòÉΓòÉΓòÉ 7.3.8. DescStart ΓòÉΓòÉΓòÉ
DescStart "<string>" <WTAG> [<WTAG> ...]
This allows to add <string> at the head of files.bbs
descriptions while tossing files from area TAGs that
match one of the <WTAG> specifications.
This statement is useful for people using download
counters and/or maximus flags for free download.
Example:
DescStart "/bt [00] " 1* 2*
This adds "/bt [00] " at the head of files.bbs
descriptions while tossing files from areas whose TAG
begins with '1' or '2'.
ΓòÉΓòÉΓòÉ 7.3.9. TagFwd ΓòÉΓòÉΓòÉ
TagFwd <OrgTag> <FwdTag> <FileSpec> [<FileSpec> ...]
This allows to forward files from an area to another.
<OrgTag> and <FwdTag> are area TAGs.
<FileSpec> is a file specification that accepts the OS/2
style wildcards (?,*).
All ingoing files of area <OrgTag> which match one of
the <FileSpec>s are forwarded to area <FwdTag>.
This way you can split or merge areas.
Example:
TagFwd 1-Comm Bbs AC*n prova.*
TagFwd 1-Data bbs *
TagFwd 1-DITO BBS *
TagFwd 1-Comm BBO *
TagFwd ISNMAIN POINTLST ptlist.* ptdoc.*
Files AC*n and prova.* coming from area 1-Comm and all
the files coming from 1-Data and 1-DITO are forwarded to
area BBS.
All the files from 1-COMM are also forwarded to area
BBO.
Files ptlist.* and ptdoc.* from area ISNMAIN are
forwarded to area POINTLST.
ΓòÉΓòÉΓòÉ 7.3.10. FeatureLoad/Feature ΓòÉΓòÉΓòÉ
FeatureLoad <DllName>
(OS/2) Loads a "Feature" DLL, to allow third party
extensions to NEF.
<DllName> can be a simple filename without extension
(".DLL" implied) if the DLL is in the LibPath, otherwise
a fully qualified filename (extension included) can be
specified.
Feature <cfgline>
(OS/2) Allows to specify configuration statements that
are to be parsed by the DLL loaded with the previous
FeatureLoad.
Note:
Multiple FeatureLoad statements are allowed, in which
case the Feature statements refer to the last loaded
DLL.
Example:
FeatureLoad MyDll
Feature CfgItem1 "This is Item 1"
Feature CfgItem2 "This is Item 2"
ΓòÉΓòÉΓòÉ 7.4. Tic Announcements ΓòÉΓòÉΓòÉ
TIC Announcements
Each announcement area is defined by a dedicated group of
statements. Many of these statements can be used before the
first announcement area definition to establish defaults to be
used in all subsequent area definitions, thus avoiding the need
to unnecessarily repeat common statements.
ΓòÉΓòÉΓòÉ 7.4.1. Global Keywords ΓòÉΓòÉΓòÉ
Global Keywords
Statements that can be used before area definitions to set
defaults (please note that all these statements can be
overridden in each area definition).
ΓòÉΓòÉΓòÉ 7.4.1.1. FromNode ΓòÉΓòÉΓòÉ
FromNode <address>
This specifies the 4D address to be used as the
from-address in the announcement messages: it is used in
the header, in the Origin and in the MSGID. Usually, it
should be your primary address.
Example:
FromNode 2:332/504.0
ΓòÉΓòÉΓòÉ 7.4.1.2. ToNode ΓòÉΓòÉΓòÉ
ToNode <address>
This specifies the 4D address to be used as the
to-address in the announcement messages: it is used in
the header. Usually, for echo area announcements, it
should be the same as in FromNode.
Example:
ToNode 2:332/504.0
ΓòÉΓòÉΓòÉ 7.4.1.3. From ΓòÉΓòÉΓòÉ
From <name>
This specifies the name to be used as the from-name in
the announcement messages. Usually it should be the
SysOp name.
Example:
From Alberto Pasquale
ΓòÉΓòÉΓòÉ 7.4.1.4. To ΓòÉΓòÉΓòÉ
To <name>
This specifies the name to be used as the to-name in the
announcement messages. Usually it should be "All".
Example:
To All
ΓòÉΓòÉΓòÉ 7.4.1.5. Subj ΓòÉΓòÉΓòÉ
Subj <subject>
This specifies the string to be used as the subject in
the announcement messages.
Note:
If the Subj text contains the ';' character, it MUST
be enclosed in quotes '"', otherwise it will be taken as
the start of a comment.
Examples:
Subj New Echo Files
Subj "New files; OS/2 BBS"
ΓòÉΓòÉΓòÉ 7.4.1.6. Attr ΓòÉΓòÉΓòÉ
Attr [P][K][C|H|D|N|O]
This specifies the attributes to be used in the
announcement messages. Usually no special attribute is
necessary, except for private announcements in the
netmail area.
The available attributes are:
P -> Private
K -> Kill/Sent
C -> Crash
H -> Hold
D -> Direct (equivalent to "CH")
N -> Normal (default)
O -> Normal (default)
The required attributes can be listed in any order and
are not case sensitive.
Examples:
Attr ; no attributes
Attr N ; no attributes (Normal flavour)
Attr PK ; Private and Kill/Sent
Attr PC ; Private and Crash
Attr PDK ; Private, Direct, and Kill/Sent
ΓòÉΓòÉΓòÉ 7.4.1.7. HighAsciiOk ΓòÉΓòÉΓòÉ
HighAsciiOk
Grants permission for High Ascii codes (> 127) in file
descriptions.
ΓòÉΓòÉΓòÉ 7.4.1.8. Prefix ΓòÉΓòÉΓòÉ
Prefix <filename>
This specifies the file containing the prefix text for
announcement messages: it is put at the head of the
message body, just before the real announcement lines.
It should usually contain something like "New Echo Files
Received:".
Example:
Prefix d:\bbs\NEF\PREFIX.NEF
ΓòÉΓòÉΓòÉ 7.4.1.9. Suffix ΓòÉΓòÉΓòÉ
Suffix <filename>
This specifies the file containing the suffix text for
announcement messages: it is put at the end of the
message body, just before the tear-line and the Origin.
It should usually contain something like "File Request
open to everybody between 06:00 and 23:00 GMT".
Example:
Suffix d:\bbs\NEF\SUFFIX.NEF
ΓòÉΓòÉΓòÉ 7.4.1.10. Origin ΓòÉΓòÉΓòÉ
Origin <origin>
This specifies the text to be used as the Origin in
announcement messages. The required " * " will
automatically be added at the head and the address at
the end, truncating <origin> if necessary to fit the 79
character maximum length.
To disable the Origin (e.g. in netmail area) use an
empty origin string.
Note:
If the Origin text contains the ';' character, it MUST
be enclosed in quotes '"', otherwise it will be taken as
the start of a comment.
Examples:
Origin <ApWorks Modena I><Tel.+39-59-246112/3>
Origin "ApWorks Modena I; +39-59-246112/3"
Origin ; empty origin to disable origin generation
ΓòÉΓòÉΓòÉ 7.4.2. Area Definition ΓòÉΓòÉΓòÉ
Area Definition
All the preceding statements can be used both before
announcement area definitions (to set defaults) and inside
each definition to override the defaults.
ΓòÉΓòÉΓòÉ 7.4.2.1. AreaTag/AreaPath ΓòÉΓòÉΓòÉ
AreaTag <Tag> [<path> [-$]]
AreaPath <path> [-$]
One of these statements starts the definition of an
announcement area.
<Tag> is the area TAG, to be logged to EchoTossLog
provided this is not a NetMail area.
<path> is the directory for the *.MSG format or the full
filename (no extension) for the Squish base.
-$ specifies the use of the Squish format.
AreaTag <Tag>
This is the form to be generally used when SquishCfg is
defined.
<Tag> will be looked up in SquishCfg to find the
corresponding path, message-base type and primary
address.
A local "FromNode" statement can be used to override the
primary address for the area (including -p<address>
specifications) found in SquishCfg.
If this is an EchoArea, its <Tag> will be output to the
EchoTossLog whenever a message is written to this area.
If this is a NetArea, as a default, the Origin will not
be used and the Private attribute will be set; you can
override this with local "Origin" and "Attr" statements.
AreaTag <Tag> <path> [-$]
This is the form to be used for EchoMail areas when
SquishCfg is not defined or you want to override its
information AND you want <Tag> to be logged to
EchoTossLog.
AreaPath <path> [-$]
This is the form to be used when SquishCfg is not
defined AND you do not need to log a <Tag> to
EchoTossLog (NetMail areas or no EchoTossLog defined).
Notes:
Any of the statements described above in this "Tic
Announcements" section can be used after the
AreaTag/AreaPath statement to override the defaults for
this announcement area only.
Please note that you can use different AreaTag/AreaPath
definitions with the same message area Tag/Path, in
order to announce different file areas in different
messages but in the same message area.
Examples:
AreaTag OS2BBS
AreaTag OS2BBS d:\bbs\mail\os2bbs -$
AreaPath d:\bbs\mail\net
ΓòÉΓòÉΓòÉ 7.4.2.2. Announce/NoAnnnouce ΓòÉΓòÉΓòÉ
Announce <WTAG> [<WTAG> ...]
NoAnnounce <WTAG> [<WTAG> ...]
This defines the list of file areas to be announced in
the current announcement message area (the one defined
by the previous AreaTag/AreaPath statement).
Multiple statements are allowed.
All the TAGs that match one of the <WTAG>s in "Announce"
and do not match any of the <WTAG>s in "NoAnnounce" are
announced in the current area.
Obviously you can omit the "NoAnnounce" statement if you
do not need to exclude areas that have been included via
the "Announce" statement.
"Announce *" makes all the file areas announced.
Special tags:
The following "special tags" can be used in "Announce"
or "NoAnnounce" statements as if they were normal area
TAGs, but are not included in the "*" wildcard (i.e.
"Announce *" does not make them announced).
"<BAD>" is used to announce all the TICs that have been
processed with some error.
"<DEF>" is used to announce all the files that have not
been announced elsewhere. A separate announcement is
generated after all other announcements have been
completed, even if "<DEF>" is listed together with other
TAGs.
"<OUT>" is used to make a concise outbound report when
the OUT or OUTVIEW command line option is used.
Subj, Prefix and Suffix are ignored.
"<OUTVIEW>" is used to make a detailed outbound report
when the OUT or OUTVIEW command line option is used.
Subj, Prefix and Suffix are ignored.
"<THRU>" represents all passthru areas. If you want to
keep NEF from announcing files received in PassThru
areas, just use "NoAnnounce <THRU>".
Examples:
Announce UTILNET SOFTDIST SDS*
NoAnnounce SDSOTH <THRU>
This announces the file areas with tag "UTILNET",
"SOFTDIST" and all those whose TAG starts with "SDS" but
not "SDSOTH" or passthru areas.
Announce PRIVFILE <BAD> <DEF>
This announces area "PRIVFILE" and all the TICs that
have been processed with errors; at the end, in a
separate message, it announces the files that have not
been announced elsewhere.
Announce SPECIAL <OUT>
This announces the file area with tag "SPECIAL"; at the
end, in a separate message, it creates a concise report
of the outbound.
Announce SPECIAL <OUTVIEW>
This announces the file area with tag "SPECIAL"; at the
end, in a separate message, it creates a verbose report
of the outbound.
ΓòÉΓòÉΓòÉ 7.4.3. Announce example ΓòÉΓòÉΓòÉ
Complete example of the announcement definition section,
SquishCfg defined:
----------------------------------------------------------------
; Defaults definition
FromNode 2:332/504.0
ToNode 2:332/504.0
From Alberto Pasquale
To All
Subj New Echo Files
Attr
Prefix PREFIX.NEF
Origin ApWorks Modena I (+39-59-246112/3)
Suffix SUFFIX.NEF
; Announcement areas: each statement is local to the preceding
; AreaTag and overrides the default one.
AreaTag APWORKS
Announce APBBS*
Prefix RelPre.NEF
Subj New ApWorks files
AreaTag OS2BBS
Announce APBBS*
NoAnnounce *DOS*
Prefix RelPre.NEF
Subj New APBBS files
AreaTag NETMAIL
Announce <OUTVIEW> <DEF>
From NEF
To Alberto Pasquale
Subj Not Announced Elsewhere
HighAsciiOk
AreaTag NETMAIL
Announce <BAD>
From NEF
To Alberto Pasquale
ToNode 2:332/504.1
Subj Processed with Errors
----------------------------------------------------------------
Complete example of the announcement definition section,
SquishCfg NOT defined:
----------------------------------------------------------------
; Defaults definition
FromNode 2:332/504.0
ToNode 2:332/504.0
From Alberto Pasquale
To All
Subj New Echo Files
Attr
Prefix PREFIX.NEF
Origin <ApWorks Modena I><Tel.+39-59-246112/3>
Suffix SUFFIX.NEF
; Announcement areas: each statement is local to the preceding
; AreaPath and overrides the default one.
AreaTag SWN_332.500 d:\msg\swn -$
Announce UTILNET
Subj UTILNET file news
AreaTag SWN_332.500 d:\msg\swn -$
Announce FIDONEWS SDS* ECHO-* FTSC NEWSLETR SOFTDIST
NoAnnounce ECHO-R*
Subj SDS/NEWS file news
AreaPath d:\msg\net -$ ; Netmail to the SysOp
Announce NODE* POINTLST <BAD> <DEF> <OUTVIEW>
From NEF
To Alberto Pasquale
ToNode 2:332/504.1
Subj Reserved file news
Attr PK ; This must be private and kill/sent
Origin ; No Origin for netmail !
----------------------------------------------------------------
ΓòÉΓòÉΓòÉ 7.5. FileFix Link Robot ΓòÉΓòÉΓòÉ
FileFix Link Robot
It's the traditional "Raid" or "TicFix" function: it allows
downlinks (but also special uplinks) to link/unlink file areas
via a netmail message.
The message should have the agreed password as the subject,
possibly followed by some switch.
The required password is that defined in the "FileLink"
statement described below.
The body of the message contains the commands.
There can be several commands on a single line provided they are
separated by blanks.
Password, switches and commands are case insensitive.
Switches that can be used in the subject, after the password,
only the _first_ letter is required (and checked):
-Help Help.
-Query List all areas (linked and available).
-Linked List linked areas.
-Unlinked List unlinked areas.
The commands available for the message body are:
[+]<WTAG>
Links all the areas whose TAG matches <WTAG>.
The '+' character is optional (useful in the case <WTAG>
starts with the '-' character).
-<WTAG>
Unlinks all the areas whose TAG matches <WTAG>.
%Help same as -h
%Query same as -q
%List same as -q
%Linked same as -l
%Unlinked same as -u
Example:
From: John Doe of 2:332/580.0
To: Nef of 2:332/504.0
Subj: Secret -H
-----------------------------
%Query
1* -1-COMM
+2*
-2-WINDOW
---
The Help and Query commands are invoked, all areas whose
tag begins with '1' are linked, area "1-COMM" is
unlinked, all areas whose tag begins with '2' are linked
and area "2-WINDOW" is unlinked.
Notes:
The actual order of command execution is based on the
area definition order. NEF scans the defined areas from
the first to the last one only once, applying for each
area all the pertinent commands.
If a link in a FileArea statement is not properly
defined in a FileLink one, it is removed when the
Link Robot re-writes that FileArea statement in
execution of an Add or Delete command.
While re-writing areas, the Link Robot will NOT re-order
the links. However it will respect an existing order
while adding new links.
If Area aka overrides are used, they are reported by
Area-List commands.
ΓòÉΓòÉΓòÉ 7.5.1. AutoLink ΓòÉΓòÉΓòÉ
AutoLink <name>
The robot will answer to the messages addressed to one
of the addresses defined in the "system" section and to
one of the names defined in the AutoLink statements.
You can use as many AutoLink statements as you need to
define all the akas you like.
If no AutoLink statement is used, then the Link Robot is
disabled.
Example:
AutoLink NEF
AutoLink Raid
AutoLink TicFix
ΓòÉΓòÉΓòÉ 7.5.2. NetMail ΓòÉΓòÉΓòÉ
NetMail <path> [-$] [-p<adr>]
This defines a netmail area to be searched for messages
addressed to the robot. You can use as many NetMail
statements as you need.
The optional -$ indicates a Squish format area.
The optional "-p<adr>" specifies the primary (default)
address for the area.
When multiple NetMails are defined, NEF needs <adr> to
choose (via zone matching) the right area where to write
the messages addressed to the FileBone's "FileFix" robot.
Usually all but the first netmail statements should
contain a primary address specification.
Note: when a Squish base is used, a pointer to the last
scanned message is stored in <path>.NEF, so that next
scan will consider new messages only.
Example:
NetMail d:\msg\fidonet -$ ; default
NetMail d:\msg\os2net -$ -p89:456/789 ; OS2Net
ΓòÉΓòÉΓòÉ 7.5.3. KillReceived ΓòÉΓòÉΓòÉ
KillReceived
This keyword instructs NEF to kill messages addressed to
the Link Robot after the execution of the contained
commands. When commented out, the messages are marked as
received instead of being erased.
ΓòÉΓòÉΓòÉ 7.5.4. AreaDescWrap ΓòÉΓòÉΓòÉ
AreaDescWrap <indent> <right>
The descriptions returned by the "FileFix" functions
will be word-wrapped so that continuation lines start
with <indent> spaces and do not exceed column <right>.
Example:
AreaDescWrap 25 79
ΓòÉΓòÉΓòÉ 7.5.5. HelpFile ΓòÉΓòÉΓòÉ
HelpFile <filename>
This keyword defines the file to be put into the Link
Robot's answer in reply to a Help request.
Usually this file contains instructions for using the
Link Robot.
Example:
HelpFile d:\bbs\nef\NefHelp.Txt
ΓòÉΓòÉΓòÉ 7.5.6. ProtArea ΓòÉΓòÉΓòÉ
ProtArea <WTAG> <level>[/<keys>]
This keyword allows to selectively protect areas from
automatic linking. Unlinking is always possible.
The protection scheme is based on the traditional
combination of level and keys.
<WTAG> specifies the TAG or group of TAGs to be
protected.
<level> is an integer number in the range 0-65535.
<keys> is a subset of the following 32 element set:
{12345678ABCDEFGHIJKLMNOPQRSTUVWX}
These keys are case insensitive.
When processing an area TAG, NEF scans the ProtArea
statements from the first one to the last one: the first
matching <WTAG> determines the protection level and
keys. If no match is found, <level> is assumed to be the
maximum and <keys> the full set of available keys, so
that the area gains maximum protection.
Usually it's convenient to override the default maximum
protection so that you can list only a few special areas
with their protection level and keys while letting all
the others get a default NULL protection (automatic
linking for everybody). To accomplish this result, you
can use a "ProtArea * 0" as the last ProtArea statement.
Please, note that the order of the ProtArea statements is
_essential_, since they area scanned from the first one
to the last one in search for a match between the TAG in
examination and the <WTAG> of the ProtArea statements.
Example:
ProtArea PRIVATE 1000/12ABC ; Protected private area
ProtArea 1* 100/P ; Areas starting with '1'
; are not for everybody.
ProtArea * 0 ; The remaining areas are
; for everybody.
ΓòÉΓòÉΓòÉ 7.5.7. FileBone Support ΓòÉΓòÉΓòÉ
FileBone Support
NEF is able to use information distributed via the FileBone.Na
and FileBone.No files.
Many useful functions are allowed by the use of these files, so,
even if you do not receive them from your uplink, you could
evaluate the possibility of creating "FileBone-style" files on
your own, just to store some information that can be retrieved
by NEF.
When FileBone-style files are used:
- The Query command reports the areas available on the FileBone,
in addition to those that are not linked to the downlink but
already available on the local system.
- Area descriptions can be returned by FileFix commands.
- Level and Keys protect areas from "FileFix" linking.
A node is entitled to add an area only if it has level and
keys that match the requirements from BOTH the "ProtArea"
statements in Nef.Cfg and the <lev>[/<keys>] specification
in a FileBone format file (if available).
- Requests for unlinked areas can be forwarded to the FileBone.
The requests that have been forwarded to some uplink are
stored in a file named after the configuration one, changing
the extension to ".Fwd". Usually the configuration file is
"Nef.Cfg", so the forwarded requests will be stored in
"Nef.Fwd".
The format is: <Tag> <Addr>, i.e. every line contains a Tag
followed by the 4D Address of the downlink that made the
request.
When a new area is created, NEF looks into this file in order
to find nodes to be added to the new "FileArea" definition.
If a requested (and not yet defined) Tag is found in two or
more FileBone files, the request is forwarded to the uplink
defined in the first FileBone statement only.
Don't mind if the Nef.Fwd file contains multiple entries for
the same Tag. This can happen when multiple requests for the
same area have been received. When the first file comes in
and the area is created, all entries will be deleted while
the link will be added once.
ΓòÉΓòÉΓòÉ 7.5.7.1. FileBone ΓòÉΓòÉΓòÉ
FileBone <file> [<fm> <to> <toadr> <acc> [<pre>]]
Multiple FileBone statements are allowed.
<file> is the filename of the FileBone-style file.
If you want to enable the forward of requests for new
areas from your downlinks to your uplink(s), you must
specify the following fields (to be enclosed between
quotes when containing space) so that they can be used
to write netmail messages to your uplink's FileFix:
<fm> is the "from" name.
<to> is the "to" name.
<toadr> is the "to" 4D address.
<acc> is a <level>[/keys] specification, to limit the
access of downlinks to request forwards addressed
to <toadr> for the areas described in <file>.
<pre> is an optional string to be prefixed to the area
Tags that are being requested.
Examples:
FileBone \bbs\FileBone.Na "John Doe" SysOp 2:332/1 0
The "\bbs\FileBone.Na" file is used by NEF, also for
request forwards.
When a downlink requests an area that is not currently
defined in the NEF configuration (usually TicArea.Cfg)
but is described in FileBone.Na, a netmail message is
written by NEF from "John Doe" to "SysOp" of 2:332/1
using the appropriate "from address" aka and "subject"
(password) as per the "FileLink" definition of 2:332/1.
The body contains a list of the requested area Tags, one
per line.
No (<acc> = "0") protection is specified (any downlink
has access to request forwards).
FileBone \bbs\FB.SP "John Doe" SysOp 2:332/1 30/a +
Only downlinks with level equal or above 30 and with the
'A' key have access to request forwards. The requested
tags will be preceded by "+".
If you need a space between the '+' and the tag, then you
must specify a <pre> that contains a space, so you have
to enclose it in quotes:
FileBone \bbs\FB.SP "John Doe" SysOp 2:332/1 0 "+ "
ΓòÉΓòÉΓòÉ 7.5.7.1.1. FileBone Format ΓòÉΓòÉΓòÉ
FileBone Format
The format for the filebone style is:
Area <Tag> <lev>[/<keys>] <flags> <desc>
<Tag>
is the TIC area Tag.
The original filebone format allows 8 character
maximum but NEF is not that limited.
<lev>
is the protection level of the area, for "FileFix"
functions.
The original format allows the range 0-4095 while NEF
allows 0-65535.
<keys>
are a set of protection keys (1..8, A..X).
Not available in the original FileBone format.
<flags>
is a combinaton of !.*& and possibly other characters.
By default (no flags) the area is uni-directional, from
the uplink to the defined downlinks.
! : Can be found at any Filebone Hub.
. : Only on some Filebone Hubs.
* : Any node can hatch into.
& : Do not send to downlinks.
Others : Private distribution.
Examples:
!
normal area from the uplink to its downlinks,
available on all Filebone Hubs.
!*&
return channel from the downlinks to the
uplink, available on all Filebone Hubs.
.*
bidirectional area (any node can hatch into),
available on some Filebone hubs only.
<desc>
is the description for the area.
Example:
Area APBBS 0 P ApWorks OS/2 BBS programs
Area NODEDIFF 0/f ! FidoNet: Weekly NodeList Updates
ΓòÉΓòÉΓòÉ 7.5.7.2. ForwardWildReq ΓòÉΓòÉΓòÉ
ForwardWildReq
When a FileFix "Add" request contains wildcards, by
default it is NOT forwarded to the filebone.
This verb enables even this type of request forward.
ΓòÉΓòÉΓòÉ 7.6. Link Definitions ΓòÉΓòÉΓòÉ
Link Definitions
The FileLink statement is used to define a link, specifying its
password, attributes and privileges.
The FileArea statement is used to define a file area, specifying
its type and the list of connected systems (that must be defined
via FileLink statements).
ΓòÉΓòÉΓòÉ 7.6.1. FileLink ΓòÉΓòÉΓòÉ
FileLink <address> <password> [#<address>] <flags>
[<attr> [<level>[/<keys>] [<WTAG> ...]]]
The parameters of this keyword have been represented on
two lines because of space, but they MUST be listed on a
unique line in the .cfg file.
This keyword defines a file link; you must use a
FileLink statement for each of your links (both
downlinks and uplinks).
<address>
is the 4D address of the link.
<password>
is the case insensitive password to be used
for all TIC exchanges and for the Link Robot
function. NEF has no limit for the password
length, anyway you should be aware that other
similar programs might have limits, so check
with your downlink/uplink before choosing a
long password (8 characters should be OK for
everyone).
#<address>
This optional field indicates a "from" 4D
address to be used for the .TICs sent to this
link (overrides the zone-match and is in turn
overriden by the area override (see
"FileArea")).
<flags>
This field is a (case insensitive) set of
characters:
<H|C|D|N|F>[<S|T>][<I|O|*>].
It can be 1 to 3 characters long:
- The first flag is mandatory; it defines the
flavour of the file-attaches that NEF will
create for .TIC and associated files.
Please note that this flag can be overridden
on a per-area basis by prefixing the link
address with a new flavour-flag in the
FileArea statement.
The available choices for this flag and the
consequent file-attach extension follow:
H -> .HLO (Hold)
C -> .CLO (Crash)
D -> .DLO (Direct)
F -> .FLO (Normal)
N -> .FLO (Normal)
The 'N' flag is provided for "compatibility",
but it's the same as 'F'.
- The second flag is optional: it defines
whether NEF must send a .TIC together with
the file or not.
S -> .TIC sent (default).
T -> .TIC not sent.
Usually the default is used (this flag can be
omitted), but sometimes points like not
receiving the .TIC file.
Please note that this flag can be overridden
on a per-area basis by prefixing the link
address with a new flag in the FileArea
statement.
- The third flag is optional. It is provided
for completeness and it is sometimes very
handy, but it is recommended not to use it
too often since its use might unnecessarily
complicate the interpretation of the
configuration.
It defines whether this link has
bidirectional access to file areas or not.
This is an override to the "area direction"
field of each FileArea definition.
Please note that this flag can be overridden
on a per-area basis by prefixing the link
address with a new flag in the FileArea
statement.
I -> Only Input is allowed from this link.
NEF will not send files.
O -> Only output is allowed to this link.
NEF will not accept files.
* -> Bidirectional link.
<attr>
These are the (case insensitive) attributes
for the Link Robot's netmail replies:
K -> Kill/Sent
C -> Crash
H -> Hold
D -> Direct (equivalent to "CH")
N -> Normal (default)
O -> Normal (default)
The Private attribute is always implied.
ATTENTION: you should usually use the 'H'
attribute for file links that are not netmail
links too. Otherwise the "Normal" flavoured
netmail replies will be routed as per your
routing configuration instead of being holded
for the file link.
<level>
This is an integer number in the range
0-65535 and represents the access level to
the Link Robot for this node. Defaults to 0.
If it is greater or equal to the protection
level of a certain file area, then this node
can link the area via the Link Robot,
provided it has the necessary keys.
<keys>
is a subset of the following 32 element set:
{12345678ABCDEFGHIJKLMNOPQRSTUVWX}
and represents the (case insensitive) access
keys to the Link Robot for this node.
If <keys> contains all the keys that protect
a certain area, then the node can link the
area via the Link Robot, provided it has a
sufficient access level.
<WTAG>
The optional list of <WTAG>s specifies the
area TAGs that must be automatically linked
to this node when they are automatically
created by NEF.
New areas can be automatically created when
unknown TAGs are found in ingoing .TICs (see
"NewAreasFrom" above in this reference).
You can make NEF automatically link the
downlink to the areas that match the <WTAG>
specification(s).
Examples:
- FileLink 2:332/593 pwd593 IN
Node 2:332/593 has password "pwd503", is enabled to send
.TICs to us ('I') and the file attaches addressed to it
(if any) will be normal flavoured ('N').
Note that file attaches to this node will only be
possible if a local area override will be used, since
the 'I' flag instructs NEF to accept files from the node
but not to send to it.
Nothing is specified about the Link Robot's reply flags
and access level and keys, so this node will be able to
link only areas with protection level 0 and no keys; the
Robot's reply will be normal flavoured.
- FileLink 2:331/196.1 pwd1961 H NK 300/ab
Node 2:331/196.1 has password "pwd1961", nothing is
specified about link direction (it will depend on the
"area direction" and local overrides), the file attaches
will be Hold flavoured ('H'), the reply netmails will be
normal flavoured ('N') and kill/sent ('K'), the access
level is 300 and the access keys are a,b.
- FileLink 2:332/1 pwd1 #2:332/500 H N 900/ab MI* *OS2*
Node 2:332/1 has password "pwd1", all the TICs sent to
this node will use the from-address 2:332/500 (provided
there is no aka override at the "FileArea" level), the
file attaches will be Hold flavoured ('H'), the netmail
replies will be normal flavoured ('N'), the access level
is 900 and the access keys a,b.
New areas whose TAG begins with "MI" or contains "OS2"
will be automatically linked when they are automatically
created by NEF.
ΓòÉΓòÉΓòÉ 7.6.2. FileArea ΓòÉΓòÉΓòÉ
FileArea <TAG> <path> I|O|* [#<address>] [-0[<days>]]
[[<flags>]<link> ...]
The parameters of this keyword have been represented on
two lines because of space, but they MUST be listed on a
unique line in the .cfg file.
This keyword defines an echo file area.
If you have a small system, you can put the area
definitions in the main configuration file (e.g.
NEF.CFG). For systems with a large number of areas and
links, it is recommended to use a separate file for the
area definitions: see the "TicAreaCfg" keyword, formerly
discussed in this documentation.
ATTENTION: when using the "TicAreaCfg" separate file,
you must put ALL the FileArea statements in that file.
You are not allowed to put area definitions both in the
main .cfg file and in the dedicated TicAreaCfg file at
the same time !
Please note that all the FileArea statements, if
included in the main .cfg file, MUST be defined _after_
the FileLink statements.
<TAG> is the area TAG.
<path> is the directory for the file area.
I|O|* is the (case insensitive) "area direction" and
defines the default direction for the area:
'I'
we accept files from the listed nodes but do
not send to them, unless an override flag is
present before the <link> or in the pertinent
"FileLink" definition.
This should usually be used for "pre" areas, in
which files must be collected from downlinks
and sent to the area coordinator via the
uplink, which will probably need a local 'O'
override.
'O'
we send files to the listed nodes but do not
accept from them, unless an override flag is
present before the <link> or in the pertinent
"FileLink" definition.
This should usually be used for areas that must
be distributed to downlinks. The uplink will
need a local 'I' override before its <link>
field or a global one in its FileLink
definition.
'*'
the area is bidirectional, so we both send and
accept files to/from the listed nodes, unless
an override flag is present before the <link>
or in the pertinent "FileLink" definition.
This should be used for bidirectional areas, in
which everybody is allowed to "hatch" files.
#<address>
defines the primary address to be used for
this area; overrides both the default
zone-match and the aka overrides in "FileLink"
definitions
-0[<days>]
When the "-0" (zero) is specified, the area is
"Passthru", that is its files will be deleted
when already sent to all the downlinks. Please
note that ANY file (apart from FILES.*) present
in the <path> and not attached to any system
will be deleted.
If the optional <days> parameter is used, the
files will not be deleted until they become
older than <days> _AND_ not referenced by any
file attach.
<days> is an integer <= 65535.
Please note that you can use the Touch and
KillDate statements to control the date used to
evalutate the file age.
NEF must be explicitly instructed to delete the
old files in passthru areas, usually in some
maintenance event.
See also the "-p" and "CLEAN" command line
options.
The list of linked nodes follows; each node can have
some <flags> attached before the node address. The
available flags are the same as for the <flags> field in
the "FileLink" statement.
<flags>
This is an optional (case insensitive) field
made up of 1 to 3 characters:
[H|C|D|N|F][S|T][I|O|*].
- The first flag defines the flavour of the
file-attaches that NEF will create for .TIC
and associated files.
Please note that this flag overrides that in
the pertinent "FileLink" statement.
The available choices for this flag and the
consequent file-attach extension follow:
H -> .HLO (Hold)
C -> .CLO (Crash)
D -> .DLO ( Direct)
F -> .FLO (Normal)
N -> .FLO (Normal)
The 'N' flag is provided for "compatibility",
but it's the same as 'F'.
- The second flag defines whether NEF must send
a .TIC together with the file or not.
S -> .TIC sent.
T -> .TIC not sent.
Please note that this flag overrides that in
the pertinent "FileLink" statement.
- The third flag defines the direction of the
link.
Please note that this flag overrides that in
the pertinent "FileLink" statement, which in
turn overrides the "area direction".
I -> Only Input is allowed from this link.
NEF will not send files.
O -> Only output is allowed to this link.
NEF will not accept files.
* -> Bidirectional link.
<link>
This is a 4D address, that can be abbreviated
whenever the preceding address has the same
zone, zone:net or zone:net/node.
For the first <link>, if incomplete, the
primary address for the area is used; anyway
NEF always writes the first address in
complete form when rewriting the area due to
a Link Robot command.
Examples:
Please note that the situation might be a little different
from what explained below, since the FileLink definitions
could have some overriding flags.
FileArea AREA1 d:\file\area1 O I2:332/1 504.1 .2 1:2/3
Typical area definition, where we receive from the
uplink (marked with 'I') and forward to the listed downlinks
(area direction 'O').
FileArea AREA2 d:\file\area2 O -0 I2:332/1 504.1 .2 1:2/3
Same as above, but passthru.
FileArea AREA3 d:\file\area3 O -030 I2:332/1 504.1 .2 1:2/3
Same as above, but the files will not be deleted until they
are 30 day old.
FileArea AREA4 d:\file\area4 I O2:5/1 3/1 332/504.2 .3
This is a "reverse" area, where we receive from the listed
nodes (area direction 'I') and send to the one marked with
'O'.
FileArea AREA5 d:\file\area5 * 2:5/1 3/1 332/504.2 .3
This is a bidirectional area (direction '*'), where we
receive from any of the listed nodes and forward to all the
others.
FileArea AREA6 d:\file\area6 O #2:332/500 I2:332/596 C555
A normal "up-link to down-links" area ('O'); we use
2:332/500 as the primary address, accept files from
2:332/596 and forward to 2:332/555 with a crash flavoured
file attach.
FileArea AREA7 d:\file\area7 O S2:332/504.1 10:10/0 *100/1
Normal "up-link to down-links" area ('O'); 10:100/1 is the
only node enabled to send to us (bidirectional override
'*'); we forward to 2:332/504.1 and 10:10/0. If we hatch
files, we send to 10:100/1 too, since it is bidirectional.
We send the .TIC accompanying files to 2:332/504.1 ('S')
even if it had a 'T' flag in its FileLink definition.
ΓòÉΓòÉΓòÉ 7.7. Compress Definition File ΓòÉΓòÉΓòÉ
COMPRESS DEFINITION FILE
The file specified in the CompressCfg statement is a sequence of
Archive definition blocks, each one starting with "Archiver" and
ending with "End Archiver". You can find an example in the
Compress.Cfg file included in the distribution pack.
The order of the archive definition blocks within this file may
be important: when trying to unpack a compressed file, the list
of archivers is scanned in a reverse order.
In the case of two archivers that use the same identification
string (e.g. ARC and PAK), you must specify the archiver that
can unpack both (PAK) after the other one (ARC).
The compress.cfg file can be shared between DOS/NT and OS/2
applications: the "DOS" and "OS2" keywords are available to
distinguish between the commands to be used under DOS/NT and
OS/2.
O.S. specific archivers or commands must be prefixed with the
relevant keyword.
IMPORTANT NOTE: The lines that begin with "DOS" or "OS2" are
parsed by the DOS/NT and OS/2 versions respectively. If you need
the OS/2 version to execute a DOS command, you MUST NOT use the
DOS keyword: if you do, it will never parse that line; if you do
not, it will execute the DOS command "normally", provided you
have installed OS/2's Dos support.
See the examples below.
ΓòÉΓòÉΓòÉ 7.7.1. Archiver ΓòÉΓòÉΓòÉ
Archiver <ARCname>
Starts the Archive definition block.
<ARCname> is the name used to identify this archiver.
Example:
Archiver ZIP
ΓòÉΓòÉΓòÉ 7.7.2. Extension ΓòÉΓòÉΓòÉ
Extension <ext>
Specifies the default extension for the compressed
files.
Example:
Extension ZIP
ΓòÉΓòÉΓòÉ 7.7.3. Ident ΓòÉΓòÉΓòÉ
Ident <ofs>,<ID>
<ofs> is a decimal integer number representing the
offset at which an archive identity marker <ID> must be
present.
Negative values can be used to indicate offsets from the
END of a compressed file. -1 means "the last byte", -2
"the second last byte" and so on.
<ID> is a series of hexadecimal figures which represent
the bytes of the marker string that must be present at
the specified offset of the archive file.
Example:
Ident 0,504b0304 ; "PK^c^d"
ΓòÉΓòÉΓòÉ 7.7.4. Add ΓòÉΓòÉΓòÉ
Add <command>
Specifies the command to add files to an archive.
%a and %f are translated to the name of the archive and
file to add.
Example:
Add zip -jk %a %f
ΓòÉΓòÉΓòÉ 7.7.5. Extract ΓòÉΓòÉΓòÉ
Extract <command>
Specifies the command to extract files from an archive.
%a and %f are translated to the name of the archive and
file to extract.
Example:
Extract unzip -qqnjC %a %f
ΓòÉΓòÉΓòÉ 7.7.6. View ΓòÉΓòÉΓòÉ
View <command>
This line is recognized and accepted for compatibility,
but not used.
ΓòÉΓòÉΓòÉ 7.7.7. End Archiver ΓòÉΓòÉΓòÉ
End Archiver
This statement is used to close a Archive definition.
ΓòÉΓòÉΓòÉ 7.7.8. Examples ΓòÉΓòÉΓòÉ
Examples
Complete example 1 (you need OS/2 only):
Archiver ZIP
Extension ZIP
Ident 0,504b0304
Add zip -jk %a %f
Extract unzip -qqnjC %a %f
View unzip -v %a
End Archiver
Complete example 2 (you need DOS only):
Archiver ZIP
Extension ZIP
Ident 0,504b0304
Add pkzip -a %a %f
Extract pkunzip -n %a %f
View pkzip -v %a
End Archiver
Complete example 3 (you need both OS/2 and DOS):
Archiver ZIP
Extension ZIP
Ident 0,504b0304
OS2 Add zip -jk %a %f
DOS Add pkzip -a %a %f
OS2 Extract unzip -qqnjC %a %f
DOS Extract pkunzip -n %a %f
OS2 View unzip -v %a
DOS View pkzip -v %a
End Archiver
Complete example 4 (archiver to be used under DOS only):
DOS Archiver ZOO
DOS Extension ZOO
DOS Ident 0,5a4f4f ; "ZOO"
DOS Add zoo a: %a %f
DOS Extract zoo e:O %a %f
DOS View zoo v %a
DOS End Archiver
Complete example 5 (it's a DOS executable, to be used under
DOS or OS/2 indifferently):
Archiver ZOO
Extension ZOO
Ident 0,5a4f4f ; "ZOO"
Add zoo a: %a %f
Extract zoo e:O %a %f
View zoo v %a
End Archiver
ΓòÉΓòÉΓòÉ 8. TroubleShooting ΓòÉΓòÉΓòÉ
TroubleShooting
Problem:
NEF does not append to Echotoss.log.
Solution:
Make sure that the announcement area is defined with
AreaTag (not AreaPath).
You might also need the SquishCfg keyword, if you want
NEF to automatically retrieve the area Path and type.
ΓòÉΓòÉΓòÉ 9. SHAREWARE ΓòÉΓòÉΓòÉ
S H A R E W A R E
If you like this program and continue using it, you should pay
the author for his work, as per the ShareWare concept of
distribution.
Please see LICENSE.DOC and REGISTER.DOC for information.
Thank you for your interest in ApWorks programs.
ΓòÉΓòÉΓòÉ 9.1. License.Doc ΓòÉΓòÉΓòÉ
ΓòöΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòù
Γòæ Γòæ
Γòæ N E F Γòæ
Γòæ Γòæ
ΓòÜΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓò¥
L I C E N S E
P O L I C Y
May 1996
This software (program and accompanying documentation) are:
Copyright (c) 1991-1996 Alberto Pasquale, all rights reserved.
DISTRIBUTION FORMAT
This software is distributed in a locked RAR archive, with
embedded authenticity-verification information.
The distribution of modified archives, including those derived
from the conversion to a different archiver, is explicitly
prohibited.
When the RAR extension is not accepted, you should either store
the original RAR archive inside a different one (e.g. RAR inside
ZIP) or get the self-extracting executable that is prepared by
the author (available on ftp.wilmington.net/bmtmicro).
S H A R E W A R E
This software is distributed as ShareWare: you are granted the
right to evaluate the program for a maximum of 30 days before
paying the author. After the evaluation period, you are required
to either register (see REGISTER.DOC) or stop using the program.
You are encouraged to distribute the original and unmodified
package freely, in any form and on any media, provided you do
not charge any fee for the program itself.
This package could be included in CD-ROM collections,
subscription download areas, BBS packages, provided it remains
in its complete and unmodified original archive.
In any case, the user must register with the author after the
evaluation period.
IMPORTANT: the registration is NOT a trade transaction, it is to
be considered as payment of royalties; therefor the registration
key is personal and NOT transferrable.
DISCLAIMER
This software is provided on an "as is" basis without warranty
of any kind, expressed or implied, including but not limited to
the implied warranties of merchantability and fitness for a
particular purpose.
The person using the software bears all risk as to its quality
and performance.
The author will not be liable for any special, incidental,
consequential, indirect or similar damages due to loss of data
or any other reason.
ΓòÉΓòÉΓòÉ 9.2. Register.Doc ΓòÉΓòÉΓòÉ
** ** ******* *******
*** ** ** * ** *
**** ** ** * ** *
** **** **** ****
** *** ** * ** *
** ** ** * **
** ** ******* ****
(C) Copyright 1991-1996 by Alberto Pasquale
A L L R I G H T S R E S E R V E D
For licensing terms and disclaimer, see LICENSE.DOC.
This program required a lot of work: by registering you will
support me in developing this and other similar products.
You will receive a registration Key that removes the initial 2
second pause and makes the program show "Registered <month/year>
To: <Reg.String>" instead of the registration request banner.
The registration is guaranteed valid for all future minor
updates and, in any case, for all versions that will be released
in a period of 2 years after registration. After this period, an
upgrade fee might possibly be required in the case of major new
releases.
The registration key works with the current version of the
program for ANY platform: you do not have to pay anything in
the case you change your operating system.
ΓòöΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòù
Γòæ Γòæ
Γòæ Registration fee: US$ 20, DEM 30, ITL 30,000 or (see below) Γòæ
Γòæ Γòæ
ΓòÜΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓò¥
ΓòÉΓòÉΓòÉ 9.2.1. How to Register ΓòÉΓòÉΓòÉ
HOW TO REGISTER
Registering is quite easy; you can register:
- Directly with me by cash, check or international postal money
order.
- via local Registration Site in Germany, Denmark (Sweden,
Norway), UK, Croatia.
- via BMT Micro (Wilmington, NC, USA), by credit card, money
order, cashiers check, personal check, German or British
currency.
- via PsL (Houston, TX, USA), by credit card.
The registration key will be sent you via internet e-mail or
crash netmail depending on availability; fax and postal mail
will be used only in case of problems.
Should you not receive your registration key in a reasonable
time, please feel free to contact me.
Please allow at least 3 weeks for response to international
airmail.
Please address your requests, complaints, suggestions to:
Alberto Pasquale of 2:332/504@fidonet
alberto.pasquale@mo.nettuno.it
2:332/504@fidonet +39-59-246112 ISDNC V34+ V32T H16
2:332/524@fidonet +39-59-246113 ISDNC V34 V32T H16 FAX
ΓòÉΓòÉΓòÉ 9.2.1.1. Author's ΓòÉΓòÉΓòÉ
Hot to register directly with the author
You have to send the registration information and money to:
Alberto Pasquale
Viale Verdi 106
41100 Modena
Italy
ΓòÉΓòÉΓòÉ 9.2.1.1.1. Cash ΓòÉΓòÉΓòÉ
Cash:
Just put the (accurately hidden) banknotes (US$ 20, DEM
30, ITL 30,000) together with Register.For in an envelope.
If you do not have US dollars, German marks or Italian
liras and do not like going to the bank, you can send the
equivalent in your currency, provided it is commonly
exchangeable. Please be aware that coins are nice gifts
but are NOT exchangeable.
ΓòÉΓòÉΓòÉ 9.2.1.1.2. Check ΓòÉΓòÉΓòÉ
Check:
Just put the check (accurately hidden) together with
Register.For in an envelope. Please read carefully the
following instructions:
- Eurocheque: ITL 30,000 (thirty thousand).
- Italian check: 30.000 lire
- Other (bank) checks: US$ 25, DEM 35, ITL 40,000 or
equivalent (the surcharge is to partially cover the
foreign check redemption cost).
ATTENTION: NO Postal Checks please.
ΓòÉΓòÉΓòÉ 9.2.1.1.3. Postal Money Order ΓòÉΓòÉΓòÉ
Postal Money Order:
Just go to the post office and ask for an _INTERNATIONAL_
postal money order. It is best to go to a major post
office, since minor ones are generally not used dealing
with international money orders. Usually you can choose
whether to use your currency or the recipient's.
Please be sure to specify the necessary registration
information in the "sender message" field or send
Register.For separately to the author.
- International money order in italian liras: ITL 30,000
(thirty thousand).
- International money order in your currency: US$ 23,
DEM 35 or equivalent.
- Italian money order "vaglia": 30.000 lire.
IMPORTANT: Please DO NOT send me normal "domestic" postal
money orders, since they are not payable outside of your
country; you must use INTERNATIONAL postal money orders.
If you would like to receive the key soon, you
can FAX me (+39-59-246113) the receipt of the
postal money order together with REGISTER.FOR.
ΓòÉΓòÉΓòÉ 9.2.1.2. Local Registration/Support sites ΓòÉΓòÉΓòÉ
Local Registration/Support Sites:
If you choose this way, you will have contacts with the
local supporter only: you will send him the money and
registration form; in a few days you will receive your
key.
ΓòÉΓòÉΓòÉ 9.2.1.2.1. Germany ΓòÉΓòÉΓòÉ
Germany:
Roland Schiradin
Stockbornstr. 10
65343 Eltville
Germany
Fidonet: 2:2454/169 Mail Only
Internet: degr9tr9@ibmmail.com
Reg. Fee: DEM 35
He has the APWORKS support echo and TIC file-areas for
my programs available. Besides he can provide you with
information about the nodes carrying APWORKS in
Germany.
He has the latest version of ApWorks programs available
for F/R with the same magics listed in Readme.1st.
ΓòÉΓòÉΓòÉ 9.2.1.2.2. Denmark/Sweden/Norway ΓòÉΓòÉΓòÉ
Denmark
Sweden
Norway:
Jens Holm
Skanderupgade 9, D2
8660 Skanderborg
Denmark
Reg. Fee: 125.- DKR.
Can be paid cash, check or postal order.
Email:
2:238/888.0@fidonet, 9:451/180@virnet, 81:445/40@os2net
for swedish and norwegian users, if in doubt, please
contact regsite for payment in local currency, reply will
be crashed back.
ΓòÉΓòÉΓòÉ 9.2.1.2.3. United Kingdom ΓòÉΓòÉΓòÉ
United Kingdom:
Vince Coen
Applewood House
Epping Road
Roydon, Harlow
Essex, CM19 5DA, UK
Fidonet: 2:257/609
Reg. Fee: GBP 15.00
Payment can be in Cash, Cheque (bankers card number on
order form please) or EuroCheck.
Or direct to my bankers. Payment MUST be in Pounds Sterling.
For payment though the bank:
Bank: First Direct.
Sort code: 40-47-86.
Account: 00449334
Account name: Vincent Coen.
Payment reference must include Sysop name and node number.
He has the latest version of ApWorks programs available
for F/R with the same magics listed in Readme.1st.
ΓòÉΓòÉΓòÉ 9.2.1.2.4. Croatia ΓòÉΓòÉΓòÉ
Croatia:
Branko Radojevic
KOPIJA d.o.o.
Pera Rudenjaka 2a
HR-20000 Dubrovnik
Fidonet: 2:381/124
2:381/20
Internet: branko@pfdu.hr
sysop@pulsar.fido.hr
PULSAR BBS Dubrovnik
Data : +385 20 413 299 (ZYX, V34)
Voice: +385 20 412 999
Reg. Fee: Kn 135
ΓòÉΓòÉΓòÉ 9.2.1.3. BMT Micro ΓòÉΓòÉΓòÉ
How to register with BMT Micro
You have to fill in the BmtMicro.For registration form and send
it (or equivalent information) to BMT Micro.
ATTENTION: for any question regarding the program, its
registration, support etc, you must contact me directly.
Please contact BMT Micro to order ONLY.
Usually your key will be delivered within 2 business days.
In certain holiday periods (Christmas, Easter, end of July,
first half of August) there might be some delay (a few days for
Christmas or Easter, a couple of weeks in July/August). If you
think your order is particularly late, please contact me first !
Mail Orders To: BMT Micro
PO Box 15016
Wilmington, NC 28408
U.S.A.
Voice Orders: 8:00am - 7:00pm EST (-5 GMT)
(800) 414-4268 (Orders only)
(910) 791-7052 (Orders / Order Inquires)
Fax Orders: (800) 346-1672 24 hours, 7 days a week
(910) 350-2937 24 hours, 7 days a week
Online Orders via BBS: (910) 350-8061 10 lines, all 14.4K
(910) 799-0923 28.8k v.FC
BBS via Telnet: bmt.wilmington.net
via Compuserve: Thomas Bradford, 74031,307
via Internet: orders@bmtmicro.com
Credit cards: Visa, Mastercard, Discover, American Express,
Diner's Club.
They also accept money orders, cashiers checks, personal checks,
German or British currency via registered mail.
Personal checks are subject to clearance.
ΓòÉΓòÉΓòÉ 9.2.1.4. PsL ΓòÉΓòÉΓòÉ
How to register with PsL (by credit card)
You must fill in the PsL.Crd and Register.For forms; then
you must send BOTH of them to PSL directly (they will forward
Register.for information to me).
You can order with MasterCard, Visa, American Express or
Discover Card: the charge is US$ 25.
ATTENTION: you MUST NOT send me any information about your
credit card. If you do, I am NOT allowed to forward your credit
card info to PSL.
ATTENTION: for any question regarding the program, its
registration, key delivery etc, you must contact me directly.
You must contact PSL to order ONLY.
PSL will notify me your order within one business day and I will
usually send your key by e-mail or crash netmail within 24h, so
if you order by fax or phone, you should usually receive your
key within 2 business days.
ATTENTION: In certain "holiday" periods (Christmas, Easter, end
of July, first half of August) there might be some delay (a few
days for Christmas or Easter, a couple of weeks in July/August).
If you think your order is particularly late, please contact me
first !
ATTENTION: It may happen that the PSL operator asks you for your
preferred diskette format. You must be aware that this may be
"standard" PSL procedure, but I will send you a key ONLY (via
e-mail, crash netmail, fax or letter), since you already have
the program.
IMPORTANT: Please, be sure to always give PsL the address where
you want to receive your key: e-mail address, fidonet name _and_
address, fax number, and/or complete postal address. If you are
not in the fidonet nodelist and I don't receive enough
information, I will be forced to send you an air-mail letter
(2-3 weeks for delivery). In the case of doubts, you can send
the Register.For to me too, by e-mail, crash netmail or fax.
Credit card registrations may be made by the following methods
(please be sure to always include all the necessary information
from BOTH Register.For and PsL.Crd).
-- Phone PsL at:
800-2424-PsL i.e. 800-2424-775 (Toll free from USA)
+1-713-524-6394 (international)
PSL Office Hours:
7:00 a.m. to 6:00 p.m. CST Monday->Thursday
7:00 a.m. to 12:30 p.m. CST Friday
Be sure to have BOTH Register.For AND PsL.Crd
available to give order information to PSL.
First of all, mention the PSL part number specified
in PsL.Crd.
-- FAX PsL at +1-713-524-6398
-- Email PsL at CompuServe userid 71355,470
-- Write PsL at:
The Public (software) Library
P.O. Box 35705
Houston, TX 77235-5705, USA
Please, let me insist one more time:
ΓòöΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòù
Γòæ The above numbers are for ORDERS ONLY. Γòæ
Γòæ Any question about the status of the shipment of the Γòæ
Γòæ order (registration key), registration options, Γòæ
Γòæ product details, technical support, etc, must be Γòæ
Γòæ directed to the author, at the address given above in Γòæ
Γòæ this documentation. Γòæ
ΓòÜΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓòÉΓò¥
ΓòÉΓòÉΓòÉ 9.2.2. How to fill in Register.For ΓòÉΓòÉΓòÉ
INSTRUCTIONS FOR COMPILING REGISTER.FOR
To avoid errors in the key, please PRINT.
Thank you very much for your support !
ΓòÉΓòÉΓòÉ 9.2.2.1. Name ΓòÉΓòÉΓòÉ
Name:
Your complete name.
Example: John Doe
ΓòÉΓòÉΓòÉ 9.2.2.2. Reg ΓòÉΓòÉΓòÉ
Reg:
The registration string you want displayed by the program.
You can use any character in the IBM set (including special
national characters above ASCII 127; if you do not use code
page 437 (USA), please specify the code numbers) and you can
use lowercase and uppercase at your preference.
Maximum length: 63 characters.
Usually it should be the same as your name, in which case
you can omit this field.
ΓòÉΓòÉΓòÉ 9.2.2.3. e-mail to ΓòÉΓòÉΓòÉ
e-mail to:
This is your internet e-mail address, if available.
ΓòÉΓòÉΓòÉ 9.2.2.4. Netmail to ΓòÉΓòÉΓòÉ
Netmail to:
You have to specify the complete destination field for the
netmail message.
Examples:
John Doe of 1:200/300.4
John Doe of 1:200/300.0
ΓòÉΓòÉΓòÉ 9.2.2.5. Crash to ΓòÉΓòÉΓòÉ
Crash to:
You have to specify the data necessary for crashing the
message. Usually this should be your system or your Boss
(if you are a point).
I will call as 2:332/504@fidonet.
- If your system (or your Boss) is 24h and it is in the
fidonet nodelist, you can omit this field.
- If your system is not 24h, please give me a 24h system to
which I can crash your netmail for routing.
- If the system in consideration is not in the fidonet
nodelist, please add its complete phone number and modem
type.
Examples:
1:200/400@fidonet
9:800/700@ABCnet +1-703-4567 V34, ISDNC
ΓòÉΓòÉΓòÉ 9.2.2.6. Fax ΓòÉΓòÉΓòÉ
Fax:
This is your (24h) fax number, if any.
ΓòÉΓòÉΓòÉ 9.2.2.7. Address ΓòÉΓòÉΓòÉ
Address:
The postal address is the last opportunity of sending you
the key.
ΓòÉΓòÉΓòÉ 9.2.2.8. Version ΓòÉΓòÉΓòÉ
Version:
You should indicate BOTH the version number AND the
Operating System.
Example: ver. 2.34 OS/2
This is not essential and is included for statistical
purposes only (the key works with all current versions).
ΓòÉΓòÉΓòÉ 9.2.2.9. Notes ΓòÉΓòÉΓòÉ
Notes:
You can send me your wish list for future versions,
or anything you like.
ΓòÉΓòÉΓòÉ 9.2.3. How to fill in BmtMicro.For ΓòÉΓòÉΓòÉ
INSTRUCTIONS FOR COMPILING BMTMICRO.FOR
The first section contains data necessary for BMT Micro (your
name, company, address, phone and fax).
The second section contains the "Registration Information" that
will be relayed to me so that I can build the key and deliver it
to you.
The third section contains the product and cost indication.
The registration is valid for any operating system.
The forth section contains data for Credit Card payment.
To avoid errors, please PRINT.
Thank you very much for your support !
ΓòÉΓòÉΓòÉ 9.2.3.1. Reg ΓòÉΓòÉΓòÉ
Reg:
The registration string you want displayed by the program,
ASCII characters only (<127).
Maximum length: 63 characters.
ΓòÉΓòÉΓòÉ 9.2.3.2. e-mail to ΓòÉΓòÉΓòÉ
e-mail to:
This is your internet e-mail address, if available.
ΓòÉΓòÉΓòÉ 9.2.3.3. Netmail to ΓòÉΓòÉΓòÉ
Netmail to:
You have to specify the complete destination field for the
netmail message.
Examples:
John Doe of 1:200/300.4
John Doe of 1:200/300.0
ΓòÉΓòÉΓòÉ 9.2.3.4. Crash to ΓòÉΓòÉΓòÉ
Crash to:
You have to specify the data necessary for crashing the
message. Usually this should be your system or your Boss
(if you are a point).
I will call as 2:332/504@fidonet.
- If your system (or your Boss) is 24h and it is in the
fidonet nodelist, you can omit this field.
- If your system is not 24h, please give me a 24h system to
which I can crash your netmail for routing.
- If the system in consideration is not in the fidonet
nodelist, please add its complete phone number and modem
type.
Examples:
1:200/400@fidonet
9:800/700@ABCnet +1-703-4567 V34, ISDNC
ΓòÉΓòÉΓòÉ 9.3. Register.For ΓòÉΓòÉΓòÉ
NEF Registration Form
(Please PRINT)
See Register.Doc for instructions: Date: __/__/__
Name: _________________________________________________________
Reg.: _________________________________________________________
e-mail to: ____________________________________________________
Netmail to: ___________________________________________________
Crash to: _____________________________________________________
Fax: __________________________________________________________
Address: ______________________________________________________
______________________________________________________
______________________________________________________
Version: _.___ OS/2 ( ) NT ( ) DOS ( )
Notes: ________________________________________________________
_______________________________________________________________
_______________________________________________________________
ΓòÉΓòÉΓòÉ 9.4. BmtMicro.For ΓòÉΓòÉΓòÉ
BMT Micro
NEF Registration Form
*****************************************
* DO NOT SEND this form to the author ! *
*****************************************
See Register.Doc for instructions, please PRINT: Date: __/__/__
Name: __________________________________________________________
Company: _______________________________________________________
Address: _______________________________________________________
________________________________________________________________
City: ______________________ State/Province: _________________
Country: ___________________________ Postal Code: ______________
Phone: _________________________________________________________
Fax: ___________________________________________________________
REGISTRATION INFORMATION
Reg.: __________________________________________________________
e-mail to: _____________________________________________________
Netmail to: ____________________________________________________
Crash to: ______________________________________________________
Product: NEF (by Alberto Pasquale) Price: US$ 25.00
North Carolina residents, please add 6% sales tax: +US$ __.__
Total: US$ __.__
For credit card payment only:
Circle one: VISA / Master / Discover / AMEX / Diner's Club
Credit card number : _______________________________________
Expiration date : ___/___
Authorization signature: _______________________________________
ΓòÉΓòÉΓòÉ 9.5. PsL.Crd ΓòÉΓòÉΓòÉ
NEF Credit Card Registration Form
PSL Part number 11474
*****************************************
* DO NOT SEND this form to the author ! *
*****************************************
Please read carefully Register.Doc for instructions.
Date _________________________
Cardholder's name, exactly as it appears on the credit card:
_____________________________________________________
[Company:] _____________________________________________________
Billing address for the card:
___________________________________________________________
___________________________________________________________
___________________________________________________________
Payment by: ( ) MasterCard ( ) Visa
( ) American Express ( ) Discover Card
Card #: _______________________________ Exp. Date: __________
Signature of cardholder: _______________________________________
ΓòÉΓòÉΓòÉ 10. Sample config files ΓòÉΓòÉΓòÉ
Some example configuration files
ΓòÉΓòÉΓòÉ 10.1. Point or minimal Configuration ΓòÉΓòÉΓòÉ
; NEF 2.34, (c) Copyright 1991-1996 Alberto Pasquale
; Nef.Cfg Example
; Minimal configuration
; RegKey <RegKey> ; registration Key
Address 2:332/504.1 ; Address
StatusLog d:\point\log\nef.LOG ; Binkley Style Log File
NetFile d:\point\inb ; Inbound
OutBound d:\point\outbound ; Primary Outbound
TicHold d:\point\tichold ; To hold outgoing .TICs
CheckCRC ; Check ingoing files
FileLink 2:332/504 Password C ; Attach with Crash flavour
FileArea APBBS d:\point\file\apbbs O 2:332/504 ; Output only
FileArea AREA1 d:\point\file\area1 * 2:332/504 ; This is bidirectional
ΓòÉΓòÉΓòÉ 10.2. Full configuration ΓòÉΓòÉΓòÉ
; NEF 2.34, (c) Copyright 1991-1996 Alberto Pasquale
; Nef.Cfg Example
; Full configuration
; SYSTEM
; RegKey XXXXXXXXXXXXXXXXXXXXXXXXXXXXX ; for Registered users
Address 2:332/504.0 ; Primary Address
Address 2:332/524.0 ; Second line
Address 2:332/500.0 ; Hub
Address 81:449/9108.4 ; Point in OS2Net
StatusLog d:\bbs\log\nef.log ; Binkley Style Log File
; EchoTossLog d:\bbs\squish\echotoss.log
NetFile d:\bbs\inb\net ; Inbounds
NetFile d:\bbs\inb\netp
OutBound d:\bbs\out\fido ; Primary Outbound
OutBound d:\bbs\out\amiga 39 ; Outbound for zone 39
TicHold d:\bbs\tichold ; To hold outgoing .TICs
BusyFlags ; .BSY support (multitasking)
; NoRaidBeforeHatch ; Skip TicFix when hatching
MsgSize 32000 ; Max size before msg split
TicAreaCfg d:\bbs\nef\TicArea.Cfg ; Where file areas are defined
CompressCfg d:\bbs\squish\compress.cfg ; OS/2 Only
SquishCfg d:\bbs\squish\squish.cfg ; Optional support for Squish
MaxPrm d:\bbs\max\max.prm ; Optional support for Max 3.x
; MaxAreaAdd d:\bbs\max\filearea.ctl 0 Transient Tic.New
; MaxAreaCompile siltp max -a -2a
FileBaseUpdate ; Internal Max filebase update
; UniqueDmpLine
; TIC PROCESSING
; NoSecure ; Disable security checks
; NoReplace 3* AP* ; Disable replace in spec. areas
CheckCRC ; Check CRC of ingoing files
Touch Creation ; Touch Creation date on toss
KillDate Creation ; Use Creation date to kill old files
; MultiLineDesc 31 ; Enable Files.bbs multi-line descriptions
NewAreasPath c:\file ; Path for auto-created areas
NewAreasFrom 10:10/100 ; Address authorized for auto-creation
NewAreasFrom 2:339/900 #2:332/500 ; Address override for created areas
DescStart "/bt [00] " 1* 2* ; Description prefix in areas 1*, 2*
DescStart "/b [00] " 3* ; A different one for areas 3*
TagFwd 1-Comm Bbs AC*n TRY.* ; Some area split forward
TagFwd GenNode Pointlst PTLIST.*
; FeatureLoad d:\bbs\nef\MyDll ; Feature DLL support
; Feature CfgItem1 "This is Item 1"
; Feature CfgItem2 "This is Item 2"
; TIC ANNOUNCEMENTS
; Default announcement parameters
FromNode 2:332/504.0 ; For the message header
ToNode 2:332/504.0
From Alberto Pasquale
To All
Subj New Echo Files
Attr ; no special attribute
Prefix d:\bbs\nef\PREFIX.NEF ; Message body prefix, suffix, origin
Suffix d:\bbs\nef\SUFFIX.NEF
Origin <ApWorks Modena I +39-59-246112/3>
; Announcement areas: default parameters can be overridden
AreaTag APWORKS ; If SquishCfg can't be used,
Announce APBBS* ; path and type of area
Prefix RelPre.NEF ; must be specified.
Subj New ApWorks files
AreaTag OS2BBS
Announce APBBS*
NoAnnounce *DOS* ; Do not announce Tags
Prefix RelPre.NEF ; that contain "DOS".
Subj New APBBS files
AreaTag SWN_332.500
Announce FLEET*
Subj New FleetStreet files
AreaTag SWN_332.500
Announce HARALD* OS2POINT CFOS
Subj New files from Harald Kamm
AreaTag NETMAIL
Announce <OUTVIEW> <DEF>
From NEF
To Alberto Pasquale
Subj Not Announced Elsewhere
HighAsciiOk
AreaTag NETMAIL
Announce <BAD>
From NEF
To Alberto Pasquale
Subj Processed with Errors
; LINK ROBOT
AutoLink NEF ; The Link Robot will answer to these names
AutoLink Raid
AutoLink TicFix
NetMail d:\bbs\mail\net -$
NetMail d:\bbs\mail\os2net -$ -p81:449/9108.4
; KillReceived ; Kill instead of marking as received
AreaDescWrap 25 79 ; Word wrap for area description
HelpFile d:\bbs\nef\NefHelp.Txt ; Returned when help requested
ProtArea 1* 300/A ; Areas 1* and 2* are protected
ProtArea 2* 300/B
ProtArea * 0 ; All the others are free
FileBone d:\bbs\misc\FileAp.Lst
FileBone d:\bbs\misc\FileBone.Na "Alberto Pasquale" SysOp 2:332/1 0
; ForwardWildReq ; Forward requests with wildcards.
FileLink 2:332/593 pwd593 IN ; Simplest link definition
FileLink 2:331/196 pwd196 H NK 300/a ; This has a Link Robot access
FileLink 2:332/123 pwd123 #2:332/500 H N 300/ab MI* FW* ; Full definition
; If TicAreaCfg is not used, you can put area definitions here:
; FileArea AREA1 d:\file\area1 O I2:332/1 504.1 .2 1:2/3
; FileArea AREA2 d:\file\area2 O -0 I2:332/1 504.1 .2 1:2/3
ΓòÉΓòÉΓòÉ 10.3. Sample Prefix ΓòÉΓòÉΓòÉ
Echo Files received for distribution:
===============================================================================
ΓòÉΓòÉΓòÉ 10.4. Sample Suffix ΓòÉΓòÉΓòÉ
===============================================================================
F/R allowed to everybody (06:00->23:00 GMT)
2:332/504@fidonet +39-59-246112 (ISDNC/V34+/VFC/V32T/H16)
2:332/524@fidonet +39-59-246113 (ISDNC/V34/VFC/V32T/H16)
ΓòÉΓòÉΓòÉ 10.5. TicArea.Cfg ΓòÉΓòÉΓòÉ
; typical areas:
; AREA1 is "uplink to downlinks"
; AREA2 is "uplink to downlinks" and passthru
; AREA3 is "uplink to downlinks" and 30 day passthru
; AREA4 is "downlinks to uplink"
; AREA5 is bidirectional
FileArea AREA1 d:\file\area1 O I2:332/1 504.1 .2 1:2/3
FileArea AREA2 d:\file\area2 O -0 I2:332/1 504.1 .2 1:2/3
FileArea AREA3 d:\file\area3 O -030 I2:332/1 504.1 .2 1:2/3
FileArea AREA4 d:\file\area4 I O2:5/1 3/1 332/504.2 .3
FileArea AREA5 d:\file\area5 * 2:5/1 3/1 332/504.2 .3
; some special areas with overrides
FileArea AREA6 d:\file\area6 O #2:332/500 I2:332/596 C555
FileArea AREA7 d:\file\area7 O S2:332/504.1 10:10/0 *100/1
ΓòÉΓòÉΓòÉ 10.6. Sample help file ΓòÉΓòÉΓòÉ
Command examples:
%Help : For Help
%Query : For a list of linked and available areas
%List : Same as Query
%Linked : For a list of linked areas
%Unlinked : For a list of unlinked areas
=====================================================================
1* -1-COMM
Adds all areas whose tag begins with '1', deletes area '1-COMM'.
=====================================================================
+2*
-2-WINDOW
1-COMM
Adds all areas whose tag begins with '2', deletes area '2-WINDOW',
adds area '1-COMM'
=====================================================================
"Special" areas:
NODEDIFF - FidoNet nodelist (diff)
NODELIST - Region 33 (ZIPped)
ISNPTLST - Italian pointlist (from ISNMAIN)
NET-LIST - Non FidoNet nodelist (diff)
=====================================================================
ΓòÉΓòÉΓòÉ 10.7. Compress Definition ΓòÉΓòÉΓòÉ
; Example Compress.Cfg definition file
;
; If you are already using a Compress.Cfg file with other programs,
; you do not need this one.
; Just make sure you use the correct switches to avoid case mismatch
; with case sensitive archivers, as ZIP/UNZIP.
;
; The DOS prefix is for the NT version too.
Archiver ARC
Extension ARC
Ident 0,1a
OS2 Add arc aw5 %a %f
DOS Add pkpak -oct a %a %f
OS2 Extract arc ew %a %f
DOS Extract pkunpak /r %a %f
OS2 View arc vw %a
DOS View pkpak v %a
End Archiver
DOS Archiver PAK
DOS Extension PAK
DOS Ident -2,fe
DOS Add pak a %a %f
DOS Extract pak e /wn %a %f
DOS View pak v %a
DOS End Archiver
Archiver ZIP
Extension ZIP
Ident 0,504b0304
OS2 Add zip -jk %a %f ; store in uppercase
DOS Add pkzip -a %a %f
OS2 Extract unzip -qqnjC %a %f ; case insensitive extract
DOS Extract pkunzip -n %a %f
OS2 View unzip -v %a
DOS View pkzip -v %a
End Archiver
Archiver LH
Extension LZH
Ident 2,2d6c68 ; "-lh"
OS2 Add lh a %a %f
DOS Add lha a /m %a %f
OS2 Extract lh x %a %f /o
DOS Extract lha e /m %a %f
OS2 View lh l %a /v /o
DOS View lha l %a
End Archiver
Archiver ARJ
Extension ARJ
Ident 0,60ea
DOS Add arj a -e+ %a %f
OS2 Extract unarj e %a %f
DOS Extract arj e -n %a %f
OS2 View unarj l %a
DOS View arj l %a
End Archiver
Archiver RAR
Extension RAR
Ident 0,526172211a0700
Add rar a -ep -y %a %f
Extract rar e -o- -y %a %f
View rar v -y %a
End Archiver